Recent content by noack214

just a question...ive been working for a local printshop that runs a mimaki jf 1631....my room where the printer is measures 16x22...there is no ventalation system in my room... now for the question....everyday after work for about 6 months to a year ive been getting extreme headaches to the...

my mimaki is a great machine....pricetag not so much...there is also a newer jf than the one i have and it runs LED saves money on power.

so far avery mpi 6121 street graphic film has been the choice by my vendor...claims to have new breakaway technology for concrete, brick...i will test and put up results..thanx 4 the input

i have a customer that would like a wall mural on the outside of his biulding which is brick. any ideas on a good media for this project...thanx

i see u post alot and people listen. im wondering if u have any knowledge for a jf1631...mainly maintanece stuff like can i soak my heads and if so how...dampers clamps and so on, any help is apreciated.srry for spelling..

i can agree with u on everything u said..the image i used was by far not a good one for this sample...i will try later with an image that should be fine...thanx a million..

i just recieved a sample of this material, and printed a image on it and when i applied it to my window the graphic looks washed out.almost as if its not there at all from any distance greater than 5ft... this is a 65-35 perfarated vinyl...is there something im missing? it seems as though it...

what would be a good size image for a wall mural 8'x8'.......customer sent me 1200x1800...looks pixalated when scaled to that size....

ok very useful info from all. but as i sit here in front of some samples ive done in the last 6 months or so. i cant help but ask myself what needs to be laminated? would i laminate a 4x8 sheet of DIBOND , SINTRA , PVC , or should i be looking to protect my finer pieces of indoor prints? and...

what good media is out there for me to get use to laminating. i dont need the best out there to start.

well thats a bummer.. and yes my ink is brittle, sometimes i feel its gonna flake off if i look at it long enough. now i may be mistaken but im sure the vendor told me there is a flex ink available for my flatbed. cant seem to find it though. must be a myth. but in the mean time if i do get a...

is there any reason y i would be told i cant print car wraps on my jf 1631?

the machine i use is a mimaki jf1631 "5x10 flatbed". the inks i use to my under standing are U.V inks.

vehicle wraps???? thanx for all the info. it really did seem logical to protect my prints. now as far as vehicle wraps, when we purchased the machine we were told we could not do wraps because of our inks. y would that be?

as i read through these forums i see i must be missing a major piece of equipment. i use a mimaki jf 1631 for printing, but have no laminator. from what i am reading this is a problem. i am with out a doubt new to this business so can any1 tell me a little more information on y i need a...