Recent content by ProntoSigns

We do not at this time but are considering purchasing one

Anyone printing with a Vanguard flatbed with Caldera rip software has any advice for color calibration and color profiling. The main issue we are having is getting the printer to accurately print red. They prints are coming out too light or too orange. The sample test file Vanguard supplies...

How easy is it to remove the ink from the jig and Got it, thank you

Apologize for my ignorance but when you say print that directly on the bed. I assume you print the outlines of the blanks on the bed itself and when the job is done you can remove the ink from the bed?

Thank you for the feedback. What are you using to print the jigs? What is your workflow? Do you create the file in ai or something similar and import it into to rip as 1 file?

Great to hear. What sizes and gauge do you print? Do any sizes require a jig or do you just align each blank in a grid type pattern.

Thank you for your response. You’re the second comment that mentioned EFI. I will definitely check them out along with the other two you have recommended. thank you

Appreciate your feedback

Is that just due to the weight of the blank?

appreciate the feedback

few 100 signs per day

We are trying to decide on the best flatbed printer for our needs. We are specifically looking to print .063 & .040 aluminum blanks. Most of these are 12"x18" but we also need to print smaller sizes like 10"x14" along with a variety of others. We plan to use a UV coater to finish the signs as...

Curious if you have table extensions? We are leaning towards no extension and just using a separate table to catch completed decal / signs. Do you think this could cause any issues for small decals or more importantly 4x8 sheets of small PVC signs or larger banner runs?

Trying to make a decision on the right Zund cutter for my business. Currently we only print on 54 inch media and I'm debating between the S3 and the G3. My business is made up of approximately 70% small laminated decals and 30% banner / PVC signage (4x8 sheets-mostly small signs). From my...

Would 4 pass be considered the equivalent to high speed type printing?