Recent content by RoCo

That's actually what we're going to do, and let the client decide. I guess I was more immediately curious as to the difference between what the Z6100 ink looks like on the canvas when side-by-side with the latex and if anyone had any experience with that (as in is it more vibrant? is color...

Hi everyone, We have an artist client we've been working with for several years who has been happy with our canvas prints from a old HP Z6100. He's been ordering 100 at a pop for a while, but recently placed an extremely large order for a few thousand. Great news for us and we're very excited...

I used Estimate for a long, looonnnng, time - the last 15 years, basically. Last I looked they seem to have totally abandoned that software and any further development of it. As someone mentioned earlier, it was a Mom&Pop operation, more or less (or at least came across that way), that offered a...

Thank you! I thought that might be the case. Appreciate it.

I looked around the site but did not see a section for selling equipment. Is that not allowed or did I miss the section?

We use the efi Fiery RIP that came with the press, and the dots are placed while the file is in pre-press, but done remotely through the Esko Kongsberg router software / workstation. Sorry about using the word acrylic - old habit.

Hopefully I can explain what's happening, here. I'm new to this particular shop and also to Vuteks (previously ran a Scitex FB6100). I'm not the press guy, either - just trying to figure out what the problem is. Printing on 1/4" acrylic sheets, 5' x10'. The art is low ink coverage, but hi-res...

So far we're really liking the new 360 we installed a little while ago. But my question is this: If I send multiple files to the printer (like for a bus wrap) why does the printer dry, pause, and reset as if I only sent a single panel? The 6-7 inches of material and 2 minutes or so between every...

I think you're right as far as blaming the media. We were thinking the same thing since we were also seeing some ink coverage inconsistencies in other places around the material. Do you have recommendations for a banner material? or do you think it's all about the age.

We figured out what's causing the pattern: it's the pinch roller. So if you're not having an issue worth the Grimco material, we'll probably go ahead and give that a chance. Thanks!

Happy with it, so far. We're just seeing some weirdness printing on banner vinyl. Inconsistent color saturation and "waves" showing up in areas. We're using Duratex, 15oz., smooth blockout banner vinyl with the preloaded HP Durable Frontlit Scrim Banner profile, since I have not created our own...

We primarily run a Scitex FB6100 UV here, and use it for flatbed, banners, and bus wraps. Boss is pushing van / vehicle wraps more and while the UV is ok for buses, I know cargo vans, etc. require more flexible ink than what our UV inks can generally do. I'd also like a higher rez printer to...

That's pretty much what I thought, since the promotional stuff didn't mention it. Thanks, everyone!

All of my other speeds / modes line up perfectly from the head alignment I did previously. I've been searching for some kind of strictly "bi-directional alignment" procedure, but have not come across one, yet. Can I go into maintenance section and then specify the 360x360 mode and then perform...

About to make a purchase...Is it possible to print on sheet media (like an Epson can)? or is it strictly roll-to-roll. I can't find anything in the literature that says it can or can't.