Recent content by saaeru

thank you for your advice too... its help us to think what we need to do... maybe next time still need your advice for another problem,,, hehe

you can choose it when there a file ?..

we have try to check it,,use sds ,,and working ,,,now this problem has solve.. we change the board data relay,, and work normaly again,, but dont know until when its will working... in last 3 days we try everyting,, swap uv lamp box.. swap ballast,, change the relay... sometimes work,,sometimes...

we dont know this the problem or not.. but after we change the pcb data relay .. this machine can work normally ... luckly we have 1 board from another ex machinee

gonna try it,,, yesterday the machine is working for half day .. completely normal ...

im have try to swap the blue conector in ballast.. error stil in right uv lamp,, the ballast fans is working ..

ok sir... will try it...

this machine error while printing... when warm up lamp uv, its still working

the one under table ?.. im try to swap the lamp uv box near printhead.. the error still in right side...

someone have ide for oce gt 365 ?... its alwas right uv lamp,, even im try swap the left lamp..error still right uv lamp, have change relay, swap the board uv power under table...still same ...what make me crazy is error still in right uv in every errror check in service diagnostic shutter and...

need some help... this machine error right uv lamp..even in try to exchange with the left uv lamp...it still error in right uv lamp.. im try to change the relay, still same, change the box uv lamp in bottom still the right uv lamp... sorry my english is very bad

finally the machine can online.. just becauze we not tight enough this couple in gantry motor...

yes ,,, its too complicated,, even the error just gantry ,,, cz dont know which one the problem,,, and make me crazy