Recent content by Signie in Oz

Hi all, Just a shout out to see if anyone has a decent pic of the Mutoh VJ1604 main board? Tried googling it but all low res and can't decipher anything...that or I need some stronger glasses... Cheers in advance...

Thanks Timson ads, Will run a multimeter over and test fuses etc...also currently checking prices on replacement fuses and capacitors. I have a question though, would I have likely blown the printhead also?...ie would I need a replacement head in addition to the fuses / capacitors...

Cheers for your replies.... Would have thought if the main board or CR board was blown the printer wouldn't receive any messages from the rip software to print. It currently recieves messages (eg...nozzle check, clean, files to print) and prints them to size just without ink. Perhaps it...

Hi 97GTB, Thanks for this info... I have heard that it might not be the CR Board...is this what you mean by 'Head Board'? Also, have you heard of any info on blown fuses on the main board and having them replaced? Cheers again

Hi Randya, Wondering if you have any advice on the following: I had some blocked heads in the black only. I removed the heads and flushed the heads with some cleaning solution. When I put the heads back in it kept saying Error Head Cable. I replaced the print Head Cables. At first I was...

Wondering if any advice on the following: I had some blocked heads in the black only. I removed the heads and flushed the heads with some cleaning solution. When I put the heads back in it kept saying Error Head Cable. The cable did need replacing and can confirm it was plugged in...