• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Techy Ant

  1. Need Help Roland VS-640 full ink cartridge sensed as empty

    Thanks again!

  2. Need Help Roland VS-640 full ink cartridge sensed as empty

    Thank you! So basically you trimmed this end on the opening?

  3. Need Help Roland VS-640 full ink cartridge sensed as empty

    Hey Jim, would you mind clarifying which tab you are talking about and where you trimmed it? A photo would be appreciated. Thanks!

  4. Polycarbonate laminate for VersaCamm?

    Could you DM me? Thanks

  5. Polycarbonate laminate for VersaCamm?

    I'm looking for a material that is easy to laminate, including a Big Squeegee. Basically, we want any recessed areas on otherwise flat surfaces bt to show. Vinyl sags and you can see dimples when it does. Also, 54" won't work. Anything 30" or smaller? Too much texture won't work either as there...

  6. Polycarbonate laminate for VersaCamm?

    Hi, Looking for a solution for sturdy (non-confirming) overlays. Thinking some kind of laminate or direct printable roll that can be printed and cut (or laminated and cut) on a 30" vinyl printed on a Roland Versacamm. What do you all use to digitally print and cut simple overlays? No clear...

  7. I need to sub small job if you can print white on clear (Gerber, etc)

    Cincinnati area but can have it shipped if in US

  8. Looking to buy Gerber Edge 2 / FX with plotter, Cincinnati area

    Looking to buy Gerber Edge 2 / FX with plotter, Cincinnati area. Must be in fully working condition, and good printhead. Please DM me.

  9. I need to sub small job if you can print white on clear (Gerber, etc)

    Hey folks, I have a very small job 100 labels 0.75"x0.5", white on clear vinyl. It's just one number string serialized. Please DM me with price and turnaround. Thanks! David

  10. VP540 Not Finding Crop Marks For Contour Cutting

    Thanks for this tip! I was pulling my hair about this adjustment for half a day. Cleaned the entire machine, heads, sensors, everything. Still refused to register the registration marks. Then in desperation searched for a solution that led me to this thread. Took a deep breath, loaded standard...

  11. Versacamm SP-300v Preheating off but heat is still on

    Any thoughts on how I switch that?

  12. Versacamm SP-300v Preheating off but heat is still on

    Found it. Apparently, Prefeat menu doesn't turn off the heat which is confusing. Instead, the heat is turned off from the Heater Config button.

  13. Versacamm SP-300v Preheating off but heat is still on

    So recently I had to reset the printed due to the sheet detection issues (cleaning took care of it). Because the printer was throwing some errors that required a reset, I did reset it. Now weird things are happening. The cleaning cycle sounds very fast and different from what it was, but most...

  14. Density adjustments and ink limits in Flexi 10?

    Did you ever find a solution to this? We're having problems with blacks not printing as sharp and this setting is a suspect.
  15.

    Versacamm (always black) head deflecting

    Thanks, Jim. So you think if I soak it repeatedly now, the nozzles may recover or is it too late for this head?
See more
Top