Recent content by the finisher

Heavy routing I'd constitute as the following: Wood 1/4in and thicker Acrylic 1/4in and thicker Aluminum .060 and thicker ACM thicker than 3mm When Colex was new in the scene they used to use the same router Summa uses and there's a reason why they switched. According to the techs, prolonged...

After using a Colex Sharpcut for years if you have literally any questions about it, ask away. I'll go over some details. Colex 5x10 static or conveyor- 220v single phase 50 amps. Steel welded frame, solid design, rack and pinion driven by Panasonic servo motors. Independent vacuum zones with 6...