Recent content by voxprint

Hi, We have a Roland Lec-300 which instead of printing black is printing gray. On a cmyk test: CYAN - OK MAGENTA - OK YELLOW - OK BLACK = GRAY Any idea of what is wrong? Can you help us? Thank you. P.S. I attached the sample (photo)

After we changed everything and calibrate again and again and again SAME RESULT! I can't believe that it's exactly the same NOTHING changed at all (we changed encoder strip, encoder sensor) - What can we do? What do you suggest? Any idea? Thank you.

New parts arrived! - new encoder strip - new encoder sensor Both changed the same result!!!! Cleaned the heads as well (black and cyan are using same head so I don't think the problem is with the head) and same print! What else should I check? Thank you.

Today: - cleaned the encoder strip line - cleaned the encoder sensor PRINT = exactly the same!!! We ordered new encoder strip line and encoder sensor - let's see if this is the case!

Thank you. Will check tomorrow and let you know.

Hi all, We are using a Roland versaUV Lec-330 and after 2 weeks of not using it now, it's misaligned. It was working perfectly before. We didn't change anything: media, ink, settings - nothing at all. so, we start: - cleaning - calibrated - bi-dir adjustment All are fine but the print is...

Hi, I just changed the headboard and the printer is like new! Printing very well! So, first thing please check the fuse!

fuse f1 blown change it and blow again. it looks that the headboard is gone! i'll keep you updated.

hi, i've done everything: - change the dampers (new tubbing) - change printhead capping top - change the printhead adapter - change the head cables the only things which are the old ones are the print heads dx4! How can i test them if they are working? the cleaning is working fine (you can see...

it worked fine by now. now it's not printing at all! no error what should i check, please? thanks

Thank you. Yes, the problem was with the captop. I clean it and then replace the line from pump to cap and now it's working.

Date on cartridge: 01/08/2015 'When you changed the damper you could draw ink easily through the line?' - yes, but not too easy Do you think you might have cracked the manifold? - i checked them and they are fine Is the cap clean and making a seal? - yes, it is clean

use by 06/2016

brand new!

Ink in the system? Yes Have you tried a new ink cartridge? Yes (starting with the most obvious) How long did it actually sit and was the main power turned on? 1 month, power on Can you get anything with a nozzle check? Nothing I just changed the damper and now I no longer have ink in it...