Recent content by ZKlapak

Thank you! i might try a head soak and pulling some ink through the lines to get the old ink out and give sun inks a try. i should have mentioned we were using STS inks, which came recommended from one tech and another said they might cause issues. hopefully its not a new head situation again...

Hello signs101 guru's, im having very odd problems with my mutoh valuejet 1324x. i was having 1 in streaks of pink/magenta at the start of my prints and pretty bad banding (pic with the pink and banding) i ended up switching out the dampers and maintenance station. the problem persisted...

Thanks you! the lever is maxed out now but the magenta is back where it needs to be, i had tried it earlier but didnt realize i had to loosen those four screws for the cam to move the head.

i would agree, i did the vertical slant print and the lines are crooked, my issue now is i loosened the allen screw behind the lines and the vertical slant adjustment tab was already very far to the left from the factory, which is where the book says it need to go to correct that issue. every...

Hello, I have a mutoh valuejet 1324x that I use almost daily as my main printer, and yesterday it started printing magenta off after a head strike. I've run vertical and horizontal alignments, although I admittedly am not the most well versed in the DIY fixing of these printers. Does anyone have...