Search results

  1. L

    winner's circle

    Hi Joe, Welcome to the group! Donna
  2. L

    About our New Heat Master Press

    Thanks, I'll check it out. Donna
  3. L

    About our New Heat Master Press

    I finally got to try mine out the other night. We made sure the switch was set to 110, plugged her in and nothing happened. :help: Luckily, my husband is a technician. He opened up the back, tightened a loose connection, and we were good to go. It must have shaken loose in shipping. I...
  4. L

    Heat Press Deal....$365 New!

    Hi Ken, When I placed my order I also thought I was ordering the Teflon sheet that you place over the graphic. What we actually ordered was the Teflon Pad Cover that goes over the bottom pad. We got exactly what we ordered...... just not what we thought we were ordering. (That explains why I...
  5. L

    Help!!! Pulling hair out!!! Bottom arc???

    This is something I can never remember how to do, and usually waste a lot of time playing around with. I finally sat here and worked my way through it taking notes as I went...... seems so simple once it's written down. In CorelDraw 9 select text fit text to path on the right side of the...
  6. L

    Heat Press Deal....$365 New!

    Thanks Bob! Donna
  7. L

    Heat Press Deal....$365 New!

    :Oops: Ha! I thought it was for the top. No wonder I couldn't get it on there. Thanks for the info. I watched a video where you placed the shirt onto the press, covered with a teflon sheet, then pressed. I thought this teflon pad was so that the vinyl didn't get stuck to the upper part of...
  8. L

    Heat Press Deal....$365 New!

    Did anyone order the teflon pad with theirs? If so, how do you get that thing on? I finally got my supplies in yesterday, but it was too hot to even think about firing that thing up. Now It's cooled down some here and I can't figure out how to get the pad on. Any hints and tips on this...
  9. L

    Heat Press Deal....$365 New!

    I think you'll need to start a new post asking for heatpress tips. I don't think those that weren't in on the deal are reading this one..... just us heatpress newbies. Donna
  10. L

    Heat Press Deal....$365 New!

    Hey Rick, I found your instructions! Mine came with two Operation Manuals. I was going to offer to mail it to you, but I see that Mike is supposed to email them to everyone. I don't know if this is an old set, or the revision. Thanks for the heads up on the 110 setting. I peeked in and I think...
  11. L

    Rounding corners

    In version 9, if you have the rectangle selected there is a corner rounder on the toolbar . It is 4 little corners with up/down arrows. If version 12 doesn't have that, just click on HELP, then HELP TOPICS, and type in 'round' in the search box and you should be able to get step by step...
  12. L

    New to this site

    Welcome! Donna
  13. L

    Heat Press Deal....$365 New!

    Last I heard the company changed the date and would not have them available to ship until at least July 8th. Donna
  14. L

    Summa Cut-off Knife

    I believe mine was defective. On the opposite side there is a little plastic slide bar that's supposed to hold the blade in place, but it just slid back and forth and didn't hold anything in place. Kind of dangerous. Donna
  15. L

    Summa Cut-off Knife

    If it's the little blue plastic thing with the razor blade in it that came with my Summa, I wouldn't give them 12 cents for it. I used mine twice, the plastic cracked and the razor blade fell out and took a chunk of my finger with it. It's like those promotional letter opener/coupon cutters they...
  16. L

    EPS help!

    All set! Shovelhead converted it for me, so I'm all set. I'll keep the rename file tip and the Postcript Interpreted tip for next time too. Thanks guys! You're the greatest! Donna
  17. L

    EPS help!

    I sent you an email through the forum with my email address, but it won't let me send an attachment, and the security features won't show me your address. If you could please send your address privately, I'll send you the file. Thanks, Donna
  18. L

    EPS help!

    I have an EPS file that I can't open and need to get the project going this weekend. I'm guessing that it was saved in a new format and my CorelDraw 9 is just too old for it. Could someone please convert it to an older version for me? Thanks, Donna
  19. L

    What kind of shop do you have?

    Hi Chris! I don't know what happened to the poll questions, so here's my comment. I recently added the vinyl cutter to my existing home office, but pretty soon there will be no room for me in here. We have a 19 x 20' foundation right off the back of the house that will probably end up being...
  20. L

    Need Cutter Recommendations!!

    After months of research, I purchased the Summa D60 last fall. It's well worth the money. Donna
Top