Search results

  1. anozira02

    Need Help Can this dx5 epson print head be repaired,, see photo..

    netsol, first I used distilled water with a bit of ammonia mixed,,, than I tried denatured alcohol that did not do it either.. then used solvent cleaner,,, that I think put the last nail in the coffin...
  2. anozira02

    Need Help Can this dx5 epson print head be repaired,, see photo..

    Attempted to recover clogged dx5 water base print head with a syringe using cleaning solution. When started to apply minimal pressure liquid started to backup from one of the open upper jet. Also noticed cleaning fluid were weeping out from the side of the head. Question is could this head be...
  3. anozira02

    epson Workforce 1100 used as ecosolvent printer??

    Update,, The R-1400 epson is holding up great as an eco solvent printer, what I like about them is the price of the print head.
  4. anozira02

    is the epson r800 print head compatible with the R-1800 printer?

    Well it's like this,,, I was bored so I converted a couple of R1800 and 800 epsons to T'shirt printing and been buying refurbished heads on Ebay and with some luck I am able to clean a lot of those heads,, also sometime I have to buy the printer just to get the head lol...
  5. anozira02

    is the epson r800 print head compatible with the R-1800 printer?

    I have an Epson Stylus Photo R-1800 with bad print head, also have a chance to buy an Epson R-800 cheap with a good print head.. Question is the 800 head will work with the 1800 printer? They both 8 channel heads with same color cartridge settings. Could I please get some input on this...
  6. anozira02

    Suggestions storing away roland Dx7 eco solvent print head?

    What is a good solvent to use for storing solvent print head for short time such as 2-3 weeks?
  7. anozira02

    epson Workforce 1100 used as ecosolvent printer??

    Since I posted last I have built several of these conversion printers and did learned a hole lot, sold 8 of them including 3 on ebay and did not get any negative feedback from anyone. I discovered back early on that the printer itself had to be modified as well in order to accommodate proper...
  8. anozira02

    epson Workforce 1100 used as ecosolvent printer??

    MY Epson stylus photo 1400 eco conversions turned out to be a success.. I like the idea that it's only a 6 channel printer, and do not require a rip to print good quality images on indoor or outdoor vinyls, and even on canvas, it will print up to 44"x13" wide.. Here is a latest video..
  9. anozira02

    Need Help Roland sp-300 will not print

    Since you changed print heads, it is possible that the head cable is damaged or not seating properly. I head a CJ-500 use to gave me those problems, also try a self test. some cases you may need to enter those numbers came with your print head, and reconfigure and re start the unit, see what...
  10. anozira02

    Suggestions where can I purchas eco solvent flushing solution or can I make it myself?

    I did call sherwin williams,, they don't seams to carry butyl carbitol. I decided to experiment using brake fluid which contains Glyco Ethers and has high anti evaporation properties. I made up a mixture of it with added ink, 2days gone by so far no coagulation taking place in the bottle...
  11. anozira02

    mixing a homebrew cleaning solution?

    I am not sure how old this post is...I searched all over the net trying to find out where to buy the Butyl carbitol,, I only seen selling it in 50gl drums.. where do I get the stuff??
  12. anozira02

    Suggestions where can I purchas eco solvent flushing solution or can I make it myself?

    I been using up a lot of solvent ink solution cleaning and flushing ink heads, now I am looking to cut back on spending, the stuff seams to be expensive.. any ideas??
  13. anozira02

    Need Help Epson stylus photo 1400 rejecting OEM ink cartridges

    I purchased this Epson Stylus Photo 1400 on Ebay,, not having luck printer accepting the OEM ink cartridges. If I load the cartridges one by one each time following the instructed by the Status Monitor, after each installation shows cartridge is full of ink, that is until installing the last...
  14. anozira02

    Need Help Rolland GX24 camm1 issur

    Can anyone tell me where the fuse location is on the gx-24 is,, I assume someplace on the motherboard. Also if someone could help me out obtaining the service manual for this unit..Thanks,,,
  15. anozira02

    Need Help Rolland GX24 camm1 issur

    I kind of suspecting the serial to usb port, it also has a standard USB port as well, a regular USB printer cable wont work on this cutter, so I am thinking of ordering one...The cutter as I read does not come with serial port cable, comes with a USB cable..
  16. anozira02

    Need Help Rolland GX24 camm1 issur

    I downloaded CutStudio,,, the problem is that my Epson 1800 comes up instead the Rolland GX-24 can't cut from the 1800 it is only a printer... have I made a boo-boo??
  17. anozira02

    Need Help Rolland GX24 camm1 issur

    Does it have a trial version?
  18. anozira02

    Need Help Rolland GX24 camm1 issur

    will try cutting from Ai and see what happens if not,,,, than download the new driver.. come to think the seller said he used inkscape.. short while ago I change the port to COM3 the Production Manager showed that it was cutting but cutter did not get the message..
  19. anozira02

    Need Help Rolland GX24 camm1 issur

    This old cutter comes with serial port to USB to windows7 Also my other cutter Vinyl Express came with on cloud Flexie I was still able to install the drive but it cant seams to find the port..
Top