Search results

someone solved it? i have same problem but in black

Qualcuno l'ha risolto? Ho lo stesso problema ma in nero

what is the difference between two error screenshots? "continue" is when lvds cable is unplugged, "restart" is when lvds cable is plugged. can someone help me? i changed lvds cable, io board (used) headboard (used) data cable (used) but always the same error.

do you solved it? i have same problem

hi, how do you solved it? it was the data cable? (not lvds cable)

found something i found error action warning manual for fb950 if someone need it can contact me.

solved the problem was the on/off switch it was full of dust cause of electric box fun. it made bad contact.

on fb 950 you can run without ph but you have to leave thermistor of AIR temperature plugged in headboard. on fb 700 isn't possible because the printer stop with error.

renewed i changed power supply of pc in electonic box and checked the 38 and 24 volts with oscilloscope during error and aren'ts they. machine give an strange error: user 2 cable not connected code 01030056 error 000079551 can enyone help me?

not these its for user i need service manual. my machine shutting down and i don't know why.

nobody found it? news?

psu = Power supply unit? i will check the voltage. do you have service manual?

up up please help me. i'm looking for service manual too... tnk u

up i need technical manual for fb950. someone have it?

fuse in the main board?

hi, random my machine turns off. with serial port i read the machine: trace :001634329: shutdown.c(00483)shutting down... now, why the machine is shutting down? someone can help me?

and what is a couple of transistor of yellow? i can see 4 couples of transistor but i dont know everyone witch color is.

i swapped the two damper yellow with two damper cyan and the problem with the respective color just to know if there are problem in color line and the problem remain in that position of printhead (now in cyan) for this i changed printhead and flat cable. still same problem the 2 lines of yellow...

Hi, we have a problem with yellow color. start to print and about 5 cm lost yellow. i replaced dampers, printhead, i checked color tube and ink flow but nothing. now i am thinking at transistor on the main board. is it possible? i am going crazy.

probably you burned the 24-38v power supply, it is a golden box in electonic box user side. i replace it with two separate power supply ov 24 and 38v. you have to watch the amperes. do you have the technical manual?