Search results

Are you using oem ink? What profile? What media?

there is no inline slitters for any printer that I am aware of. Fotobo has an xy cutter but if you do anything rigid or plan on cutting anything rigid you should just get a router that is belt driven.

I hope they support their printer better than they try to support the EFI's that they sell...

thanks follow up. I do not see where to turn the barcode server off at in cut server. The only button I see is scan a barcode.

So saturated having an issue where our Summa would just stop cutting in the middle of files. No Lyme or reason just stops. No way to recut or continue the cut. Ones is finds that point that is as far as it goes. Reset everything back to default, updated software and firmware. Printing from most...

colorado M series can use flex print to give you what you are looking for.

Im not sure lasers can be controlled by onyx. I know if you want to be able to cut with cnc's you need to add grand format cutting to your onyx key. I would assume if they do manage lasers, it would fall under the same realm.

You cannot access the service menu unless you pay and go to training for the printer. Then every year after you have to pay a renewal fee for the service key. These printers were not intended for end user servicing. Depending on where you are located there are a couple of dealers that are...

you can do all of this in Onyx.

I have a Colex and had the same issues. It does have the conveyor. Zero is never zero even after a table map. Added a Kongsberg C64 and eliminated almost all of my issues. If the stock is old it can still crack. That seems to be the only very random issue.

if they are supplying media you have to charge hourly, plus ink, plus any finishing

my cell is 8566691086 if you would like to chat

I am located in New Jersey

I am. Perfect working condition we just needed faster equipment. White ink option, extended tables and roll to roll. I have the edge guard kits if you plan to do packaging but I would have to sell them separately. They cost 8K.

perform all of your calibrations, if still an issue, you need to have a tech recalibrate the carriage head height.

the problem is the oring between the upper lower ink reservoir. Its a simple fix but also and expensive repair if you damage the unit. But before you look into that, when you engage the pump when you purge air, is the magenta pump working?

if you are printing rolls of vinyl or wallpaper the kala shines. If it's your first cutting device look at a cnc like a Colex or esko. You can still cut all of your roll to roll media but have the advantage of cutting rigid boards.

Rotary converter from American rotary is 5-6k

Heater settings? 90% of media issues is heat.

Buy a GFP. Don’t waste your money on this laminator