Search results

the only other thing i can think of is make sure that the plotter is setup to read the correct size of crop marks. on my plotter i manually tell it what size crop marks i created. also make sure you laser sensitivity is strong enough. mine is set to 5

I have the same vinyl plotter. here is what you need to do: WHEN CREATING CROP MARKS IN FLEXI USE CROP MARK 1 WHEN YOU MAKE YOU CROP MARKS REMEMBER THE SIZE OF CROP MARK ON YOUR PLOTTER PRESS FUNCTION 1>SCROLL DOWN TO SETUP>DETECT MARK>SCROLL TO SIZE>THEN CHANGE TO THE SIZE OF MARKS YOU...

Can we play name that font.. I think the handwritten style is custom and I can't find a decent match for the "i am" thanks

Wensco has a black/gunmetal color.. I love them they have #2 size

That's awesome..good job

Is Wasatch just a RIP? I would think you could use the Mimaki RasterLink RIP, it should RIP and CUT with your Mimaki Workflow the best

It would be by pushing a couple buttons on the plotter...I have a CG Sr3 I after setting origin tap setup the screen then shows test cut I then press enter.. Do you not a have a manual? Or just too lazy to read? I'm sure you can find one online pretty easy.. As for your other problem your...

Watch their videos at https://vimeo.com/signvox

Ha go figure.. I don't and have never used start and stop, and the stroke weight is I believe when you have a stroke it will cut the outside of the stroke instead of the center of.. and laminate just a little more pressure is needed - always do test cuts

I'm not sure I understand what you want to do?

No i don't, its pretty easy tho.. you can ask me any questions you have on it though

I just did a webinar with Bryant and signed on with them. He did great with my webinar showing me everything and making sure I understood. I have been using excell and and made up estimating and art proof templates that i made in Corel. I have been searching for something for a long time and...

I have that same cutter - and purchased it from them as well - they did not help me with anything at all either - What do you need help with?

When you turn the machine on it will tell you the current firmware.. I had an issue (i was using finecut) but the version of Corel - finecut - firmware were not in sync and my contour cuts would start good then start getting off more and more.. Also try getting/installing finecut plugin for...

and in the contract have a disclaimer/clause that YOUR not responsible for slips and falls and whatnot

I did graphics on a UFC style octogon mat for local MMA and used Phototex high tack.. It lasted through all the fights but was hell getting back up.. so if I do it again it would be regular Phototex.. I would sample phototex and if it's more permanent Phototex High Tack.. I chose Phototex for...

check to make sure the firmware on the Mimaki is upto date with the version of Wasatch that you are using. Also make sure that the size of your Registration marks are what your plotter thinks it is reading.. If your printed 20mm marks have your cutter set to 20mm marks

an 18oz blockout double sided banner for pole banners...All the major suppliers carry it

Yes, in "most" cases only the install "which the op stated he wanted" will go to local sign companies. The fabrication and printing goes to a National Sign Company that can handle a project of 500 or more stores and that National Company subs the installs out. Same with Service work. It's just...

Looking forward to seeing it Sydney!