Search results

  1. 8' x 16' Signfoam

    what is the thickness of the panel? sometimes we will rout out the back of the sign and inlay ply-wood to support the foam and give it strength.I also biscut the panels together with marine grade epoxy.is the panel routed and/or sandblasted? Good luck Brian
  2. replacing sacrificial boards on a 408?

    after 6 years i finnally need to replace the table boards on my sabre.I thought i read that some of you were using sintra to replace the boards.Gerber, the rip off masters want 53.00 per slat!!!!,plus the tape to mount it.just wondering what other people have used instead of the gerber...
  3. where can i purchase enroute

    I am looking for a salesman to purchase enroute and anwser my questions.I sent an e-mail to SA international and got no reply yet.Is that the only company that sells enroute?? thanks Brian
  4. what is the cost to go 3D

    My boss wants to know what the cost to convert our gerber 408 to 3D software.Here is what I have found so far. Enroute pro $6000.00 We currently only have art path. Re-set up Table with new drivers and software ?$$$ I am not sure what training is involved in running enroute.We...
  5. Sabre 408 5hp spindle

    I also think you should look into having that spindle repaired.I think you also have the option of removing the spindle and mounting a router.Our spindle is going on 6 years and still runs great.Gerber has you locked in for buying a new one as far as i know,and they will probably hit you pretty...
  6. Gerber Service Plans

    Hi everyone I have not been able to visit the site in a while,we have been extemly busy as usual.We are starting to run the router alot now and are thinking of getting in to one of the gerber service plans.Just wondering if anyone else pays for them. the gardian plan covers parts and...
  7. spindle I/O error on sabre 408

    yes dennis it has been expensive this year.I talked to gerber and did some trouble shooting and was told that it is my communications card.I sure am learning alot about servicing this table.was told that a static charge probally killed it.I have been cutting alot of sintra and it seems to...
  8. spindle I/O error on sabre 408

    got yet another error message from my table and the spindle will not fire up.anyone have any ideas what causes this error.this is the third error message this year.beginning to think the table is falling apart.I want to get into a service program but dont know which one to get.only thing that...
  9. Sabre error message again

    table running good I was told that the arm was to far back.during power up there is a check of all the motors and axis screws.the y axis turns back and if there is no place for it to go you will get an error message.overall the table is running good now.I am thinking about entering a service...
  10. Sabre error message again

    fixed??? Just got made and tried to shove the y axis forward.arm was all the way back.it moved maybe 1/4" forward.no error message anymore and table did orient.I thought i was told that the arm should move manually if you push it and that is not happening.I was very much encouraged by midwest...
  11. Sabre error message again

    not sure Dennis.just replaced y axis lead screw.Install of part went very smooth and table was running great.
  12. Sabre error message again

    My sabre is not running again.This time the error message is y-encoder motor error.not sure what the problem is now.using my sabre alot more and seem to have alot of problems.:help: any ideas what the problem is?? thanks Brian
  13. Software for GS750 plotter

    We are finally ready to purchase a new plotter for cutting sandblast stencil.we have decided of the Gerber GS750.We were quoted a price of 7,100.00.We now need software to run the plotter.is has to been compatable with AI CS2.salesman does not seem to know what he is talking about.:help: Any...
  14. the truth about CNC machining...

    I agree with andy.I only have a few things to add.I use 1/16 to 1/2 bits routing all different materials.the clean-up and edge finishing is sometimes a problem.match the bit to the thickness of the material that you are cuttiing.do not let the bit stick out more that it has to.long bits(sticking...
  15. sabre408 not working HELP!!

    router problem fixed I was able to fix the router finally,but it was not cheap.after talking with Bob we were able to determine that the bearings were not the problem.They were easy to pull out and clean though.I needed a new Y axis lead screw.Bob warned me it would not be cheap.He was right...
  16. sabre408 not working HELP!!

    more info on router Bob here is a little more info on the problem.I believe that the problem lies within the bearings but i am not positive.when I power up the machine and try to orient the machine the errror comes up X axis error. after restarting the table several times i can get the arm...
  17. sabre408 not working HELP!!

    Hello everyone, I havent been able to vistit the site for a while.been distracted by work and more outside remodeling of our building.i should be able to visit more often now.Back to the problem.I have a sabre 408 router table and never had a problem with it in 6 years.now the table will not...
  18. pen tool part #

    does any one know what the part number is for the pen tool replacement for a gerber router.I finally broke mine off and cannot find it listed anywhere. thanks Brian :unclesam: Have not been able to visit the site much,we have been very very busy.will post some pics of the waterpark in...
  19. O

    Comment by 'openwood' in media 'exterior directional'

    yes we do design all themed signs and usually work from an exhisting logo for main signs.we are returning next week to install some of the themed work.I will post pics when we retrun.there is still a ton of stuff to put up.this is a 600 room,90 million dollar indoorwater park in ohio.and that...
  20. exterior directional

    exterior directional

    sandblasted redwood panels with router cut foam copy on top panel.mounted to 8" round treated posts.
Top