• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Flexisign pro VP 540 cutting order

    Hi Guys Just cutting vinyl I’m running flexisign pro and a vp 540 I know theirs a click box setting of optimise cutting order but even with that selected my plotter is back and fourth is their a sequence plot setting like Omega software where it will cut up across the page in order then move...
  2. Need Help Roland VP 540 print problem

    How do you have your settings set up on vinyl profiles etc any chance you attach a photo please
  3. Need Help Roland VP 540 print problem

    I should also mention I’m printing straight from flexisign pro
  4. Need Help Roland VP 540 print problem

    I’ve tried various heat settings rite upto both on printer and feed dryer on max still no good
  5. Need Help Roland VP 540 print problem

    Hi thanks for the reply’s i am using the correct profile for the media which is MPI 2010 which matches the correct vinyl the ink is Eco series which I haven’t had issues with in the past.??
  6. Need Help Roland VP 540 print problem

    Eco solvent inks I’ve tried both print heater and dryer at max heat still no good it doesn’t seem to drying quick enough then it’s runs as as it feeds onto the dryer …. Both print heater and dryer feel hot do their working
  7. Need Help Roland VP 540 print problem

    Hi can anyone help when I print some of the darker colours they are not not merging properly see photos any ideas would be greatly appreciated Room temperature is good Printer heater 38 Dryer 48 Printed on high quality setting 1040 dpi And tried on 720 x 720 dpi Still not rite I also had...
  8. Need Help Roland VP 540 print problem

    Hi can anyone help when I print some of the darker colours they are not not merging properly see photos any ideas would be greatly appreciated Room temperature is good Printer heater 38 Dryer 48 Printed on high quality setting 1040 dpi And tried on 720 x 720 dpi Still not rite I also had...
  9. Vp 540 blurry print

    Hi Terry Thanks for the reply I have tried increasing the temperature from print dryer from 38 to 48 and feed dryer from 48 to 50 didn’t make a lot of difference what I found after wasting loads of materiel and ink is that it does this when set it on standard print 720x720 dpi but when I print...
  10. Print quality

    Hi I run a Roland vp 540 with flexi sign when I print say black text on dark yellow background the black bleeds into the yellow in standard setting but does not on high quality omits other colours print fine on both
  11. Vp 540 blurry print

    Hi can anyone help in printing solid black onto yellow selected from fill/stroke editor when I use any other background colour it prints fine but when I user the yellow it comes out thick and blurry??? Thanks in advance
  12. Need Help Ink overspray Roland vp540

    Thanks for your advice appreciated
  13. Need Help Ink overspray Roland vp540

    Yeh it’s had 4 manual cleans and 4 deep cleans so it’s like you say it’s not from clogging only leaves the expense part
  14. Need Help Ink overspray Roland vp540

    This was shot count on the cyan
  15. Need Help Ink overspray Roland vp540

    @ solvent ink jet Thanks for replying what you said about the the dot sizes on test print made sense do you think an overnight head soak may help ?
  16. Need Help Ink overspray Roland vp540

    I had a media jam a couple of weeks ago after 3 deep powerful cleans and using up loads of ink no different I don’t get that when I do a print head test it says all nozzles are firing but there’s clearly an issue
  17. Need Help Ink overspray Roland vp540

    Head height low and high test
  18. Need Help Ink overspray Roland vp540

    I have done the head alignment print in service mode and you see their are lines in the cyan and overspray on left hand side ???? Any ideas on what’s causing it and how to fix it ?
  19. Need Help Ink overspray Roland vp540

    It’s a Roland VP540 and I think you have to enter service mode to test Its says service mode protected when I’m trying …
  20. Need Help Ink overspray Roland vp540

    @ Proofread people The machine was supposed to be reconditioned when I brought it a couple of years ago so I’m not sure if that was one of the parts renewed or not, I you can just run me through the steps to check the print head alignment please
Top