• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. sp300 media shifing / feeding crooked

    Hi there, I'm trying to problem solve a new reoccuring issue I have wiith my Sp300. Recently the media wants to starting going crooked on me after the first 18" is printed (pushing to the right). This of course bunches the material causing head strikes. I print on static cling Material...
  2. Heater Help - erratic behavior - sp300V

    Hi there, My sp300V is having some heater issues. The "print" heater is capable of warming to its full capacity. It can hold it for sometime, however after being operated for a while the heater will shut down and no longer will hold the set temperature. The amount of time before it shuts...
  3. Versaworks How can I send an already ripped file to print multiple times

    Hi there, I've been working in Color choice up until recently. I have finally upgraded to versaworks. I know i'm really starting to catch up here. Anyway in color choice I could rip a file and then send it to print as many times as I wanted. This was nice because lets say you are printing...
  4. Equipment needed to print on beer bottle caps

    Hi there, I've been working with my Roland for a while now and love it. I'm looking to expand my operation. I'd like to start printing custom beer bottle caps (small runs of 100-200 caps at a time). Could anyone point me in the right direction for the correct equipment to do this. I'm...
  5. Ink Dripping from Head

    Hi there, I've been using my Roland CJ-500 converted to eco sol with great success over the last year. I replaced almost everything. I just recently had major amounts of black ink fall onto my print out. Not sure if it actually black or a mix of all 3 colors on that nozzle. I turned the...
  6. Is anyone selling a working gerber?

    Hello, I'm looking for a working gerber edge machine. I'm leaning towards the edge FX. It would be nice if it comes with the plotter and some foils would be a bonus. Please private message me if you have anything that could get me up and running. Thanks !
  7. Simple Heat Question

    So I run a CJ500 which is slow i'm told. I have the material run over the heater, its gets nice and hot ! But it seems like by the time it gets to the print head its totally cooled off. Should the material still be hot when it gets to the print head, or is the point to heat it up nice and...
  8. What is this Heat Cable ?

    My heater stopped working recently. The machine i bought apparently had a major ink spill at some point that got all over the heat cable. It became brittle and upon touching it i snapped it. I've since cleaned up all of the ink. So I need to replace the wiring in the back. My question is, what...
  9. How to print over an image twice

    Good morning, I'm going through the routine of getting a good print on some white static cling. As I read about this material, I can see that it is not the easiest material to work with. It goes from washed out with ink limits to fuzzy lines from pooling very quickly. Its hard to get that...
  10. Printer- Resolution- Profile or Ink? Pics attached

    So i've got a cj500 converted to an sc500 up and running with new heads. i'm running it off flexi. My prints are not looking all that great so i'd like to go down the list of things to do to get them in order. I did align the heads and per the manual i did adjust everything to line up...
  11. replacing print head this week, a few questions cj500 eco solvent

    Hi there, I'm replacing the heads on my printer this week. They are clogged after sitting for 2 years and they are done for. (I have another thread open with the cleaning and replacement of other parts i've tried) I've read the service manual several times and I don't think i'll have...
  12. How do I cut vinyl into sheets

    Just bought a roland SC-500 eco solvent printer and am learning how to use it. I used to have a print vendor make my product but decided to try and do the printing myself. The product i sell is window clings. I print them on a 12 X 18 sheet. The printer prints and countour cuts the images...
  13. Anything else I should try? Print Head CJ-500 eco sol

    Hello again, I've recently purchase a cj500 converted to eco solvent that is in so so shape. I grabbed it at a good price knowing that the work needed would probably include new heads. I know the machine sat for about 2 years but i don't know much more than that. Mechanically the machine...
  14. cj 500 converted to eco solvent print head

    Could someone tell me what is the correct print head for a cj 500 converted to eco solvent. I just bought this machine and am going to attempt to clean the 2 heads. If that does not work I want to make sure i purchase the right ones. Are they they Dx4 or Dx2. Also in some place's i've read...
Top