Search results

Does anyone want this? Msg me and I'll forward you the serial no.

I've just picked up this FY1800cut electric trimmer for a good price but, I can't find a maintinance manual anywhere on line. Even the fayon website comes up with no information. Does anyone have any version of this available?

My 7151 is producing quite a heavy black overspray when printing tactile components Can anyone give me a little insight? Worst of it produces on the far left back potion of the bed. But it's not limited to that location. The spray is in the direction of the head as it travels. Running the...

I've noticed on my firends JV33 that his machine runs alot quiter than mine. I've lubed the linear rail, done a bit of cleaning and what not but it still screams like a 5 yr old with a new bike on xmas. Majority of the sound now comes from the Y Motor. Has anyone lubed up their motor here and...

I'm looking at a 100w CO2 laser and thinking if I should get one of those Chinese ones on eBay. Has anyone picked up one of these units? Your opinion? $6k v $30k is a considerable thought to have about these

I'm trying to find if there is a way to schedule a cleaning cycle either before or after a print for the JV33. In the printer settings, the only 'scheduled' cleaning cycle is either Auto or Print and then the length can be dialed in. E.G. cleaning cycle after 2000mm etc, unless I'm missing...

Hey all, I have a job coming up where we will be installing quite a bit of floor graphics in a shopping centre. Does anyone have any tricks or ideas on application tools that will aid us in laying down the vinyl and won't destroy our backs?

Can anyone give advice on a 1300mm wide guillotine? I'm getting mixed info from reps regarding what can and what can not be cut. Mainly they say that they are only made for 1 - 1.5mm stock. Composite panels, although are soft, the guillotine cant accomodate 3mm stock. Has anyone got one in...

Thought I might start a thread on 3D printed parts you might need for your Mimaki. Mimaki HQ here wanted $150 ea for the fume extraction fittings. I had one of the original and thought I could atleast try to print it. Here's the file. It should also accomodate any other machine with the...

I can ping my IP of the printer. I can ping the IP of the printer from other computers. I can see the address in my router. No hardware or software has been installed since last use. I've rebooted, hard restart, turned the printer off/on, prayed to the gods... Next will be a sacrifice to...

So, this particular jv33-160 has become my white whale. So far I've successfully changed it from running BS inks, replaced the ink lines and various consumable parts etc to get it up and running to be a stable solvent printer. But... I'm having this continuous issue of nozzles dropping out after...

Repairing about 12 of these units over the last few years, I've now run into this issue. I'm replacing the head and these errors are popping up. So... Head toast? Ribbons? Board?

Is anyone rolling the edges of their composite sheets to give a really nice edge? I've seen this particulat finish on some jobs adn I would like to replicate it for use when I make our braille signs. I want to use a standard sheet of ACM and cut multiple panles to the size we need. E.G. 200mm x...

I've just purchased the ink emulator chips for my UJF 7151 plus and I'm having issues loading it to work correctly. I've been emailing the supplier and to the best of their abilities, they are trying to help work this. But... I'm still coming up short. Is anyone using this particular chip and...

Can anyone assit me? Recently my fletcher upright panel cutter is bending my panels. It's making it so I cant put them flat down on the flat bed without a bow or corner upturned..

Jv33. New cap top. New dampers. Correct adjustments made to said cap top. Multiple inkfills and hard cleans. But I'm not getting any of the ink to pull through. Manually, no problem. The ink flows to the dampers and they're primed. Head soak/nozzle wash has the fluid sitting in the cap top and...

Can anyone assist here? I'm running rasterlink 6 and currently have 1 x jv33-130 and 1 x UJF attached. UJF via Ethernet and JV33 via USB. I've recently purchased 1 JV33-160, and I'm having issues conneting it to RL. Mainly, it wont register a new printer. to simplify this process, and...

I would like to print off some posters for our office over here. Does anyine have any good sites they can recommend? Anything I can find online is of mediochre quality and not really clear.

Is anyone running 6 or 8 colour CMYKLcLm configuration on their JV33? I've converted mine from dual 4 colpour to 8 lines, but I'm not sure of the cartridge config left to right. Any help?

I'm finding it a little hit & miss at current using subbies for install work. They all have their strengths and weaknesses, but I am finding it hard to deal with them if/when something goes wrong with an install. I'm thinking about creating a formal agreement between me and the subbies that...