• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. 1641 Page Feed Issue

    When printing on my newer 1641, longer prints like 8-10 ft come up nearly an inch short in the page feed direction, but are perfect in the carriage direction. I have went through the PF adjustment and it was a tad off, but once corrected, it still comes up short on longer prints. Printing out of...
  2. Mutoh 1628X Error E152

    Printer had been printing great, then out of nowhere I went to take it out of sleep mode and saw some garbled readout on LCD instead of what should be there,. Powered the printer off and back on and No LCD readout initially but error light would light when powered on. Tried turning on and off a...
  3. Need Help 1628x profiles for flexi 21

    None of my 1628x profiles print right with flexi. Have been using onyx but with the version 21 of flexi I can now use spot colors for the 4 channels opposite the cmyk and I dearly want to get all my stuff back printing in Flexi. Using Ecosolvent ink and midgrade stuff like 3165 and IJ35. All...
  4. Need Help UsTech AK-600

    I have a US TECH Master Worf Master tech Master whatever they call it this week Laminator. Looks like all of the US support has disappeared from the net. I have started laminating 60" material with it, first using the Fellers Lamex and secondly 3M 8508. Im not sure I have everything set up...
  5. Master Worf USTech AK-600

    Recently bought a used, but like new AK-600. USTech, Master Worf, Master Laminator, etc.... (A lot of names on it). It is a heavy built machine and hopefully will be better than my old Daige solo. Questions: Does there exist any written paperwork on setting the tension (shafts and rollers) and...
  6. 1324 Profiles

    Wondering if someone has a great graphics 2 720X720 profile for flexi 10.5 that is a good all around choice for media such as Oracal 3651 and 3165 and a lot of the intermediate type stuff as such for a Valuejet 1324. Having trouble finding profiles that are graphics 2 and print to my liking...
  7. Valuejet Status Monitor VSM Mobile

    Anyone had luck with this? I have Valuejet Status Monitor working on my computer, but actually think I have a use for the mobile version when I am in another area of where I work at. I cant get it to set up. jbennett
  8. Q42 Vinyl Express Signwarehouse

    This cutter has a mind of its own! has anyone had problems with the ARMS or contour cut accuracy? This one is so inconsistent that I can't even troubleshoot it. It seems to do something different every time!I do the ARMS sensor test and I get an error every time. I have set the sensing level...
  9. Vinyl Express Q100 (SW branded Graphtec)

    My older Q100 has gone a bit crazy. The cutter head moves horizontally along the machine in a very slow manner. It will go completely across the width of the cutter until it is stopped by the cross cut stub (which causes a Y position error). I talked to SW, they were pretty helpful, but I wanted...
  10. Vertical banding/streaking

    From looking at attached pics, what do you think is causing the vertical streaky look? It is almost only in the light blues and the pure c m y Kprints great. Since the streaks are isolated to the same spot each time, could it be encoder issues and is there a procedure for cleaning it? How about...
  11. VJ-1204 DX-5 head recovery

    I have a lot of missing nozzles on my black. Have recently replaced maintenance station and dampers and performed lengthy head soaks. Printer prints awesome in quality 4, but just leaves streaks in black in my preferred graphics 2 modes due to the missing nozzles coupled with high speed I assume...
  12. mutoh vj 1204 dampers

    I am wanting to replace dampers on my VJ1204. I have taken the covers off, but can't get the piece that the service manual refers to as the damper fixing material that sets right on top of the dampers off. the manual shows simply rotating it up and no screws. Don't want to get rough with it. Any...
  13. VJ1204 Mising nozzles

    My Valuejet 1204 is missing a few of the black nozzles when I do a nozzle test. I have tried various profiles and have historically used one for Oracal 3651 and Graphics 2 with great results and no lines. It now leaves small lines through the print especially in the black or a color that uses a...
  14. Take up reel for VJ 1204

    I print long prints very often. Was considering a take-up system. Anyone have opinions, ideas, links? I'm even considering making some sort of a manual system. It would beat what I have to do now. All help is greatly appreciated. jbennett
  15. Graphtec CE1000-60 Interface

    I have decided to try to hook up my old Graphtec CE1000-60 that came with some other stuff I bought a few years ago. I am running windows 7 64 bit and Flexi 10. The cutter works fine using the RS232C interface; however, I want to use it with the parallel port as both of my 9 pin serials are tied...
  16. Q100 (fc7000 I think)

    Lightning hit last night. Killed some tvs, router, etc... Now my q100 isn't recognized by the usb hub. It powers on and will do test cuts and all seems well except won't communicate. I have tried a new usb cable. No luck. other usb devices work fine. Mainboard maybe?
  17. RIP Error. Not enough memory.

    Ok. Started getting a RIP error. Not enough memory message in Flexi Production manager with my VJ-1204. Has been working fine. Printer and computer have both been restarted, unplugged, etc.... Any ideas? All help is greatly appreciated. jbennett
  18. Fellers Pop Up profile for VJ 1204

    Any recommendations? All help is appreciated. The one on fellers site is for a 1604 it appears. I am having trouble with getting a smooth print. jbennett
  19. Sign Vandalism

    OK. I need a little help. I was called about a month ago to come take down a sub-division sign that had been spray painted on by either some kids or some very uneducated riff-raff. They sprayed some words on both sides of the 4' x 6" aluminum faces. I tried using different chemicals to see if I...
  20. Banner patching

    I did a dumb one this weekend. Did several printed banners and the put Saturday for the day of the week instead of Friday. It is for a local civic/charity event and I am more or less "helping". The day of the week is at the beginning of a 3 inch red bar on the top of the 12 foot banners. I dont...
Top