• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. 640 says white cartridge is out of ink, but it isn't

    No, but we only got it a couple of months ago

  3. 640 says white cartridge is out of ink, but it isn't

    Alright, I just tried that and it didn't fix the problem, so apparently it's not the cartridge that's at fault

  4. 640 says white cartridge is out of ink, but it isn't

    Yes, they can't get here till a week from today. But it may be something simple that I'm overlooking. Wondering if anyone here had had the same issue and what they did to fix it.

  5. 640 says white cartridge is out of ink, but it isn't

    For several days now, the machine is reporting that it's out of white ink, but the cartidge is almost full. I've removed and replaced it several times, tried cleaning it, reset the machine etc. but it just keeps beeping and saying it's out of white ink. I don't know where to go from here, the...

  6. Materials won't lay flat

    Thanks for the input everyone. Having checked everything over, the problem seems to be that the Colorip software overrides the vacuum setting on the printer, and even with it set on "strong" (there are only two choices in the software, normal and strong) the vacuum is just too low to do much...

  7. Materials won't lay flat

    I've noticed that I can increase the amount of vacuum using the front panel controls on the printer, but the software just overrides it. In colorrip, there are only two settings available, normal and strong. I'm trying it with the setting on strong but it doesn't seem to make much difference...

  8. Materials won't lay flat

    The material is usually getting these bumps and things before it gets to the heaters, so I don't think that's the issue. Should the vacuum be on while the machine is printing? The vacuum works, you can hear it, but it doesn't seem to pull the material down. It DOES pull it down while the machine...

  9. Materials won't lay flat

    I'm using an SP-300 to print on various materials, including adhesive vinyl sign material, banner material etc. and as the material is fed into the machine, it develops small bumps that end up getting wiped over by the print heads, leaving streaks all over them. The machine has been checked by a...
Top