Search results

Hi, I am using Flexi to print to my Roland VG machine. The problem I have is when I use the Graphtec Segment Area Type 2 registration marks they are outside the print. However if I use the barcode feature for 'Roll' so I can send it off to cut unattended, the registration marks are places...

Hi, I am using Flexi to print to my Roland VG machine. The problem I have is when I use the Graphtec Segment Area Type 2 registration marks they are outside the print. However if I use the barcode feature for 'Roll' so I can send it off to cut unattended, the registration marks are places...

Hi, I have an SG 540 along with another older Roland printer. Both work fine and I have always used OEM inks since my first Roland SP540 back in 2003. However the company that does my maintenance has told me that the TR inks I have been using in my SG540 will no longer be supplied after the end...

Hi, I have a Seal 62 Base laminator, which I have had for about 6 years now. Excellent machine thus far. However one of the the shafts that support the laminate at the highest point of the machine appear to be slightly bent. I have over the past few days been getting a slight wrinkle on the...

Hi, I am printing on the Arlon SLX Cast Wrap materiel with Flite. I have 2 printers, a Roland SG540 and my trusty older VS540. My question is, which in is better for wrap material, the TrueVis or the EcoSol MAX ink? I have had slight milking issues with the TrueVis ink, but I would like to get...

Hi, Just came in this afternoon and wanted to use my CE5000-60 to cut a job. It had cut 3 job perfectly this morning before I left the office. It came up with a Y Position Axis error, so read through he forums and found a lot of info pointing me to a full reset. So did the full reset. Started...

Hi all, I know many of you are using Triangle inks in your Roland machines. I have a 4 3/4 year old VersaCamm SP 540V which is exceptionally reliable, had 2 problems (print head , encoder module) in all that time. I don't want to change and then find I am getting all sorts of funny...

Hi, I have just had to rebuild my printing machine. I run VersaWorks and th disk I had was for version 1.0. Unfortunatly I canno find it for some reason and need to get hold of a VersaWorks install disk. As it happens I spoke to Roland Ireland many months ago about a new disk and they have...

Hi all, Had this problem on and off every so often since the upgrade to VersaWorks 3 but since I have upgraded to 3.1.1 it happens to me every couple of times I set up a job in VersaWorks. My last to job setup have ended up hanging, its a matter of killing the task and restarting it but it is a...

A customer of mine needs to have a backdrop with 2 different logos aligned aligned and repeated top to bottom. I know how to align the logo vertically in Illustrator, however I need to be able to get them to have the same gap between the logos so that they run top to bottom. Is there any way...

Hi all, One of our computers which is used to control 2 cutters (Serial) and the Edge (Parallel) has just had one of its comm ports fail. We cannot get it to work, which means that at present we need to fiddle round the back and exchange cables between to the 2 cutters - a real pain. So I...

Hi, One of my suppliers has offered me an Easymount EM-1380 SH laminator with hot roller. The price is very good, however I would like to find out if anyone else has one and if there have been any major problems experienced. Thanks in advance, Neil

I have a problem whereby the last few bits of a job sent to the cutter do not cut. An example may be that O have 2 logos to cut, the first cuts fine, the second will have about 95% cut and then the cutter just stops. It does not go back to it origin, just stops part way through the cut. This...

I have had a look through the posts on the forum related to this error but none seem to fit my problem. The only one that may is the one posted by Zardoz_Canada but I have the problem with all my cutters, not just the SP 450V. A bit of the background to follow: I am running 7.6 on PC and have...

Does anyone know if there are any problems with Flexi 7 and upgrading to XP SP 2. If anyone has any info, please let me know as Microsoft is removing support for XP SP1 from October 10th this year. Thanks in advance. Neil

I have been able to create a grid in Illustrator using the grid tool. However I want to be able to change the attributes of it from 5 x 5 to 10 x 12. Where can I locate the attributes that are used to create or alter the grid pattern? Thanks, Neil

I need to urgently tile a print job and I don't want to wast a large amount of material. Can anyone tell me how to do this. I have attached the image from within Versaworks. Basically there are 2 part tiles from 2 images in the queue, all I want to do is print these 2 part images side by...

I have a job that is 72" wide and my printer is 52" wide, so I need to tile my job. The job contains 2 images so what I need to do is print the large portion of the image, 52 x 60 then the remainder of the 20" of both images I want to tile onto the remainder. I have used the Tile Icon in...

Does anyone use Photo Print DX to design and print to a Roland VersaCamm? If so, how do you find it? Does it have a good range of profiles for the VersaCamm? Any info would be appreciated. Currently using Signlab 7.0 but this does not work since I upgraded to Max inks for the VersaCamm...

I know, before someone calls me a dope, this is probably very easy, but I cannot for the life of me sort it. What I want to do is add some sparkles to my image. So I go the the brushes tab, press on the expansion arrow and then add the 'Assorted Brushes' but nothing seems to happen All the...