I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Thanks for the pro tip. Yes, a piece of masking or app tape would do the trick. I have an approximate guide from Precision's response below of 110% - 120% stretch will be required.
The logo is approx 50"W x 60"H.and it's wanted on 4 "sides" (N,S,E,& W) of the tank. If all else fails yes, I could...
Appreciate your thoughts but I can't screw into the metal tank plus it's cylindrical and not flat. Might end up glueing 1mm aluminium sheet and cutting it to the shield shape of the label.
Thanks for your feedback. What a huge job. Do you have pictures ? My logo will be a little more taller than your test strip !!- approx 60" high.
Even if I stretch it too much, being a wine bottle label it won't look weird (it's actually a shield shape) as there's nothing to compare it with, as...
It's Me Again, how do I calculate the scale to stretch the height of a wine bottle label design print so that it looks optically correct when installed on a corrugated water tank ?
If I just install an undistorted print, I imagine it's going to look like the height has shrunk. It's a bit far out...
Hi all, me again.
So my XP computer has died which I've been running Omega 2.5 Edge2 and HS15+ on for years.
My laptop has been running subscription flexi and a HP L360 & Summacut on Win7.
It would be nice to bring the 2 systems together onto a new machine - so automatically Win10 comes into...
Just a clarrification - it was the X motor without the encoder that stopped working. As Frank suggested above, we removed the belt which then allowed the cutter to function again until the spare motor/part arrived. Interestingly the motor helps with the speed adjustment. Without the motor the...
Great info Frank.
For the record it is the motor with encoder which fails.
(Part number 391-114 REVA 24VDC) Made by Hansen Corporation Princeton Indiana USA 47670
Cat item number 116-33224-9 and takes 7cm belts (Part number unknown).
Thanks Frank, we were able to move the motor/rollers which was jammed or stuck or locked up. We got past the initialising process and were able to continue on cutting the same job from the start again.
Unfortunately the same motor locked up again so at least we have isolated the issue and will...
D160SE cutter run from Flexi19 Subscription for many years without a problem.
Today the cutter stalled partway through a job and LCD screen show X-Axis Error.
So power down to erase the job and power up.
Insert media, lower pinch bar and cutting head travels left then right.
Then LCD screen...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.