I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
This buckling of the vinyl is happening on and off. it does it both on and off of the takeup, so its not a tension issue with the takeup. Machine is a Roland VG2-540. media is Arlon DPF 4600 GLX. I have been running Rolands for years and never had this issue. It will work fine for yards and...
I have a Seal 54EL cold Laminator. I purchased it new 10 years ago and it has been a great machine. We have been having tracking problems lately. We can tell the rollers touch on the right hand side and the left hand side the rollers are about 1/16" apart yet. we have tried everything that...
I have used Corel draw since 1995. As of late we were using Corel 2018. I just subscribed to the Corel graphics Suite 365 day subscription today. I purchased 3 licenses for 3 work stations here. When I talked to Customer support they assured me I would be able to install one license on my...
Roland vs-640. Replaced encoder strip, and encoder board, still getting black lines and bars printing What next?? waiting to hear back from tech. any help appreciated.
I was told yesterday that our Roland VS 640 has been doing a lot of self cleanings as it prints and it filled the 500cc drain bottle in less than 2 weeks. Aside from not being told sooner I am sick to think that over a full 440 cc cartridge of ink was wasted. but what is causing it? We did a...
We have used Laser engravers for the promotional products side of our business for over 10 years, so after seeing the UV printers at some shows we decided to take the plunge and buy a Roland LEF 300 UV printer. Disappointingly the tech who set it up does not have much experience with the...
We run a Roland SP-540I and a VS-640 We have usually try to keep our print/cut length to 40" or less so we don't have vinyl banging on the floor. has anyone built a catch basket system or any other way to cut longer runs? Again this is print laminate and cutting with crop marks.
We purchased a new Baileigh WR-48V. We are just getting our feet wet but have been struggling with the cutting quality. would like to know what other users think of this machine. thanks in advance.
I am running a SP-540i and a VS-640 I usually have a total of 6 sets of ink in house at the same time. 2 sets loaded in the VS Double CMYK, one set in the SP, and 3 sets on the shelf. Just wondering if there is a better/less expensive source for the Roland inks. (Not interested in 3rd party...
I am running a Roland VS-640. My job size is 51.13 wide x 42.62 High printing to 54" roll. In this case I need to run the same job 12 times. it is with crop marks we will lam and then return to cut. I set my page to customCUT enter the actual page width that the machine read 52.12 I add 1/2...
OK I apologize in advance if its a stupid question but I gotta ask.... We had a big job come in for all white 12" block letters to be used on outside dumpsters. We ran out of white 651 yesterday and need to complete the job. we are a 2 day ship from any supplier. I have a 30" roll of 3165RA...
First off I have done searches on this and all of the threads are old. I apologist if I missed a newer thread, and would happy to be pointed to it. I have always used Oracal. primarily 3551 with 290 lam and for more short term stuff we use 3651 with a 210 Lam. we mainly do some vehicle...
Is it just me, or has Grimco discontinued the Friday email sales flyers? I look forward to these and have not seen one the last 2 Fridays?? Just wondering if I somehow got bumped off?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.