I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Just an update here. I got the can of Clear Jet and tested my banner with it. So I printed the banner let it dry for about an hour and then applied the Clear jet. Everything came out good with it. The spray didn't leave a tacky feeling on the print. Thanks for the help everyone. :thankyou:
The laminate on a roll leaves a haze on the print. Since the scrim is rough on the print side it doesn't go on clean. I have a pressure laminator. I put the print in the sun for a few hours and the haze cleared up. I don't have a few hour for each print. Do you have a suggestion on the roll...
The humidity is probably the biggest factor. Right now in New Orleans its BAD. I have a can of Clear Jet on its way. I am giving that a try. I let the prints dry about 2 hrs before applying. We have a pressure lamination machine also. We have tried that but it leaves little air pockets...
I printed a banner with my hp z3200. It was on scrim material and decided to put liquid laminate (aerosol can) on the banner. I put two coats and let it dry for about 24hrs. Went to touch the banner where the ink is laid down and it was tackie. Did I put to much? Should I just use one coat...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.