• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Can I overlay printed graphics on Matte Wrap Black vinyl

    Might be a stupid question but it seemed like before on small jobs when I put stuff on matte laminate it just didnt seem to stick as good but it seemed like it worked ok, I never had problems but I have a pretty big trailer to wrap and want to do it in a matte black (color change) and then put...
  2. Question Heat or No Heat for print cut stickers

    I have some print cut with no lamination but it is contour cut in the print, I always printed with heat and waited as long as I could before I contour cut it (I leave it in the machine) but within a couple hours the edges would curl some, I was then told to try with out heat so I slowed it down...
  3. Does anyone have the SIGNBOARD JNL Reg. font that could type out couple letters

    I have a small personal job, boat numbers restoring fathers boat, I found the font its SIGNBOARD JNL Reg but I dont have it (even though I have 1000 different fonts) I really dont want to purchase the font for $29 to use it once. Its not a commercial thing or anything. I hope I dont get yelled...
  4. How did I get my VG2 to cut like a tangical cut instead of swivel drag knife like it used to?

    Hi All, I was doing a bunch of stickers and perf cutting and I noticed the knife was picking up in each corner and cutting past the corner, for those runs it didnt matter now I need to do a window with a bunch of lettering but dont think I want it to cut like this, I looked and could not find a...
  5. Need Help Where to send in Graphtec FC7000mkt 160 Main board? to be fixed?

    I know this is a older plotter but I got it and its like new, I had it hooked up across my office usbto ethernet to usb and into plotter and worked great for like 2 years all of a sudden I get cannot open port in flexi, looked it up and (signs101 to the rescue) says usb port on plotter not...
  6. How to clean up deflected nozzles?

    Hi, I purchased a Roland VG2- 54" last year and I have just been noticing that my cyan has a couple nozzles that seem to be off (deflected?) I am self taught on all this wide format stuff and I did alot of research but haven't found exactly what I was looking for. (I dont like the search button...
  7. Need Help Font help

    Hi, Usually I can search and find a font that is close but I am having troubles with this one. It is for a vintage off road race truck that we want to make look the same as when it ran back in the day, any help would be much appreciated. Thanks, Brian
  8. Good Photo paper allround

    Hi, I would like to get into printing more pictures and canvas on my VG2. I have a good canvas and I also been printing on Pop-up smooth banner material works good but the color is more like a light grey so I don't think it pops as good as I think it could, so I would like to print on a nice...
  9. Can someone tell me where I can buy this reflective vinyl

    Hi I am looking for this color vinyl in reflective just like the pictures, I can find the ambulance yellow vinyl just not in reflective. The picture shows it in reflective and they want to stay with the color and reflective vinyl. The company that did the vehicle originally went out of business...
  10. Need Help How to square up a Roland VG2-540

    Hi Everyone! I have a Roland Vg2-540 and a cheap chinese laminater (audley) I am having problems when I laminate the print wants to skew to the left it seems all the time, I tried to check the distance from the roller to the print holder on the laminater and it seemed to be off but no way to...
  11. Anyone know how to get margins the same after sheet cut at the beginning and end?

    Sorry this is a little hard to explain but I am printing some maps and I just want to print and then sheet cut and then start a print again and sheet cut but when I started I first did a sheet cut and then printed the map and when the map was done I did another sheet cut but when I looked the...
  12. I need the fingers that hold down the vinyl on gerber edge -

    Hi, I love this sight and now I just purchased a gerber sr 1500 just to do stuff from home and make a little extra money but I recently found out that the guy who sold this to me took off one of the holders that go on the bail to hold the vinyl down, they look like fingers that ride on the vinyl...
  13. Can someone help ERROR 30 operation on jv3 160sp

    Hi I am looking for help on why I get a error 30 operation on my jv3 when I hit test/print I looked at other threads and found out its a generic code and to check for the door switches and I found 2 but sounds like there is a 3 rd one I got the one next to the display and the one on the cover...
  14. What solution do I need to clean and flush jv3 printheads

    Hi I have a jv3 printer that was giving to me but the heads are completely clogged up. I cleaned the lines all the way, have ink in the dampers and tried to suck the ink from the pumps but nothing. I need to soak and clean the heads. Any advise on how to go about this would be a huge help...
  15. Thanks for all the Help From Green Bay, WI

    Hi there, I am a new registered user here but lately I have been using your site as I just picked up a jv3 160sp not working and sitting for a little while. Your site has been a huge help on cleaning this thing up and trying to get it working. I have the lines clean and full of cleaning...
Top