Search results

Thank you very much.

Last time I had a head fail I couldnt even start the machine up to get to the settings to disable the head. Kind of defeats the point doesnt it? Now that my LM is about dead in my head2, I want to disable it so I can still print fine with head1. And if the head completely fails, I'll still at...

Yea, I guess thats the trick. I need to find what wavelength my UV ink cures for the rastek, and find a led system that is also that wavelength.

Hi everyone! I have a rastek h652 thats past end of life and can no longer get support for it (though this isnt the sort of thing support would help with anyway), and we're wondering if its possible to replace the UV bulb set up with an LED UV set up. In theory this doesnt sound impossible at...

Hello everyone! Our 652 just stopped turning it lights on. We checked the thermal sensors for continuity and they seem fine. We've tested the capacitor and it seems to be doing what it should. We changed lights just in case they both burned out at the same time and they still wont turn on...

i need this info as well. did you ever find what you needed?

is this in addition to the typical "silvering" effect of cold laminators. Can you share some pictures?

You never know. Digiprint print head prices are almost half of what they are else where and I've had great success with them. (Just checked and DX4 heads are back up to 517, but I did buy two heads previously from them for just over 400 each, must have been a sale)

yes its really spelled like that

Just wondering if anyone has bought any print heads from these guys and can tell me how it went. Thanks! Ivan

Hey guys! I've been working with this printer for several years now. You always have to purge the heads before printing, and while white purges just like the rest it takes a little bit more effort to get the white acceptable. Thats always been the case. However, now when purging white takes...

What does your head bias test look like? service menu/head rank/headadjust/bias/testprint

Found it, this is what it looks like for those of you who couldnt find any info on it.

I have an XC540, any idea where this head lock is? I'm looking for an actual bolt hole? edit: found it, disregard

Hey guys! We're buying another XC-540 from a few states over and will be driving it down in a trailer. I've done a lot of reading up on it, but one thing I'm confused about is where to lock the carriage. Im looking for some sort of blue head lock something and I dont see it. Thank you!

Yea, I was pulling tight against the heater instead of the tensioner and that seemed to work for a while, but now its back to tracking after say 20 feet or so. It doesnt always happen, but it happens most of the time. I had a GS6000 and loved the take reel on that thing, I could trust it to run...

transistors should all measure (left leg to right leg) around 40-42 ohms. if they're all within that than they are probably good. That high temp is probably a thermister error because the cable is damaged. I agree with what Vander said, replace the cables and the fuse and try again. However...

Having the same issue today but Black and Yellow for me. Just got done printing stuff all weekend and monday. Took yesterday off, came in today to no black or yellow. Machine hasnt been touched.

Hey Guys! XC-540 Changed my black print head a few weeks ago. Everythings been going great. Been printing a ton and everything looks great. Took the day off yesterday and came back today and Yellow and Black are not printing anything during the print test. I switched cap tops. There was...

I dont have the machine to do the soakings, but I've seen the machine. Looks cool. Yea since I've posted this, Ive been told the CE4W1 will not work, however if its just a matter of a bracket then idk. Digiprint has the CE4 45129144 head i need for 2k, so I might just go that route. Did you...