Search results

Working

Thanks guys but im pretty confident in my solution. After rubbing on the plotter a bit during a cut, the vinyl REALLY clings to the plotter even with the vacuum off (and clings even stronger than the vacuum) Sticking some vinyl to this strip area, where the rear sensor is, has my machine cutting...

update , it seems when the vinyl is passed over the plotter, the rubbing causes static electricity making the vinyl to "cling" to the plotter (the strip right behind the roller). This "static cling" causes resistance on the vinyl thus causing the material to bunch up when cutting. I stuck a...

ive used 45 and 60* blades. Blades are moving freely, it seems like the thicker materials hold up better being that the material tends to stay flat when going thru the rollers while thinner materials are more flexible and easier to bunch up. The roller lock handle jiggles a little bit may be a...

No stand

No problem on the hijack, 651 also gives me the most problems, i cant quite get the hang of the pen force. The vinyl really bunches up between the rollers with the 651. I'll try to get a video of it

i wouldnt doubt "OPERATOR ERROR)))))))))" but what doesnt make sense to me is how i had absolutely no problems the first 3 weeks and now im starting to get more and more inaccurate cuts. Im not sure how a 3 week old blade and brand new blade be "too dull" but i will try a third and check...

Hi, new to this forum. I Picked up a GX24 about 3 weeks ago and out the box it was super easy making perfect cuts on Oracle 631. For the past few days ive been noticing everytime the blade cuts into the vinyl it moves/shifts the vinyl around bunching it up between the rollers as if more...