• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Mimaki Equipment Service / Maintenance Discontinuation for September 2014

    Machine Discontinuation Date CG-100AP Sep, 2014 CG-130FX Sep, 2014 CG-160FX Sep, 2014 CG-75FX Sep, 2014 JV22-130 Sep, 2014 JV3-130SL Sep, 2014 JV3-130SPII Sep, 2014 JV3-160SP Sep, 2014 JV3-75SPII Sep, 2014 UJV-110 Sep, 2014 Parts will remain available until on-hand (US)...
    • cbh
    • Thread
    • Replies: 3
    • Forum: Mimaki

  3. JV3 Parts NO More!!

    The JV3-250SP is covered until December 2016, so most parts will be available until at least then.

  4. JV33-260 (FW 4.4) and MAPS

    Source: Supplement for the Basic Operation manual (MAPS function) On the JV33, MAPS is only available from FW 5.60. The machine can be upgraded, and I don't know of any downside to the upgrade.

  5. Mimaki CG-130 FX /FineCut8 Contour cutting way off

    I assume the graphic measured okay. This looks like it's most likely file related. You can determine whether the problem is in the hardware or the software by printing a full row of them with a separate single cut mark for each label. If the cuts are all good, then the problem will be in the...

  6. Mimaki CG-130 FX /FineCut8 Contour cutting way off

    To start, just to be sure, I would measure the printed graphics to make sure that the print is not the actual problem. Next, there are two encoders (one for each axis) which the cutter uses to position the blade; both are integrated into the motors. There is *no* feedback as to *actual*...
Top