Search results

Anyone else just get flooded with emails in the last hour? Bummer though. Was looking forward to Florida for my birthday :(

hey all! Got a bit of a weird question. over the last couple rolls of material we've run, ive had some adhesive leeching out on the edges. Does anyone know if theres a way to move the drive roller so i can clean that puppy up? Functionally its not causing any issue, i just hate looking at it...

Hey all! Just wanted to see if anyone had any possible reccomendations on shops that have the capabilities to produce a 20 foot by 50 foot banner for a client we have. We just dont have the space here to be able to accommodate that kind of size. Thanks for all in advance!

Anyone have any experience with this? I am an operator by trade, not an installer by any means. These wraps would be going on my own amps, over the existing tolex. This is something ive had in mind for quite a while and would like to give it a shot on one or two of my practice amps. I have...

Hey all. Looking at finding a new supplier for pretaped easel backs, 20 inches up to 27 inches high, with an adhesive strip pre applied. Quantities over a 1000 if possible. If anyone has any companies in mind, would be much obliged! Thank you in advance!

anyone have any good tips for cleaning out some gunked up ink in our waste ink receptacle under the wipers in an xf640? right now im just using flush to break it up and hopefully get it to drain. any tips or tricks to speed this up would be much appreciated. thanks all!

Just got off a support call for unrelated issue, but was informed that they will no longer be supporting V.10 after Jan 1st, 2020. Just in case noone has heard yet.

Hey all! Hoping someone can help me out. Got a job for some reverse print 10 mil polycarb that i personally have never run before. planning to run latex currently. any suggestions on printing that could be helpful would be much appreciated. got a lot of nerves on this one! thanks!

Whats everyone jamming to today in your shop? Anything new? Right now ive got some live Greensky Bluegrass going loud. Nothing like banjos echoing in a big warehouse.

Hey all! So spot color stuff is really one of my only holes in caldera knowledge. Does anyone have experience with this or have any good resources on this topic? Thank you all!

any recommendations on a backlit fabric that is latex compatible?? thanks in advance!

Hey all! Just wanted to see if anyone has had this happen. We're using caldera btw. What is happening is the bottom 1/4" to 1/8" is being cut off of the trailing edge of our prints when running a full 48" file on a 96x48 sheet. Havent had this issue until recently and i cannot for the life of me...

Hey all! We recently have upgraded our LX850 to the Latex 1500 and we still have a fair amount of inks and heads. Some inks are expired, but will run. We have all newer heads forsale as well. Can offer up to a 30% discount off retail! Message me for details on remaining stock and we can work...

hey all! was just wondering if anyone has any experience replacing pinch rollers on the 560 or any 5 series latex printer? if someone could gimme a quick rundown of the procedure i would be forever in your debt! thanks so much!

hey all hope someone may have insight into this one. downloaded a new backlit profile on my 560. after syncing it, i am now getting a 79:04 error everytime i send a job over. any thoughts??

Hey all. I've got a new HP Latex 1500 coming in to replace our aging LX-850. Any users out there know what i can expect for a learning curve? Everything i have seen with it just makes the 1500 look like a beefy 850. Really what i am asking here is, am i in for a surprise when it arrives or is it...

Have had this roland for about 3 years now and only recently have been having this problem. When doing the media setup, it seems to be measuring the full width of the possible media at 63.5 and not the actual media size loaded in the machine. We've been getting by with just using the rip to set...

Hey y'all, our 126 r2r is nearing end of life and were just looking at options. Need a 126" roll to roll, leaning more towards uv rather than latex and need some insight into what other operators think or what they are running. if anyone can help, id really appreciate your thoughts!! thanks!

hey just saw mac tac has a new line of non slip, no lam, concrete and asphalt decal, anyone get a chance to run any yet? how would you rate it against jessup's asphalt art? i know its a new product, just figured id ask around since it piqued my interest.

Any current users have any feedback on using the machine in a working production environment? I hear sales people and HP reps talk it up as awesome. But no end user feed back makes me worry.