Search results

So I took the carriage off and checked for debris etc, bearings all seemed ok, put it all back together and now I am getting a cross cutter issue e01019. I didn't make not of how high the the motor part on the carriage went if that makes a difference. I can cut ok, just not cross cut without the...

Thank you, I'll take a look and contact you if I need any help. Thank you

Hi all I'm not sure if I am going crazy but watching the FC9000 cut some stickers I notice a slight stutter the head is moving along the carriage. It is cutting ok but vertically perfectly and when doing a die cut it is perfect, when cutting along horizontally especially on a die cut, the cuts...

did you find anything else?

As per the title, does anyone have the Service Program for Epson S60600 they don't mind sharing? I have a media width issue and I think the sensor needs replacing. I found the service manual online and it says you can check using the service program. There are copies on eBay but I'm not sure...

Load media error. When I load the media, the head moves top the left as it normally does and then I get the error. I have cleaned around where the sensor is but nothing changes. I don't seem to have a clear cover on mine like the one I saw on your tube (not sure why) but I cleaned around the...

Hi all I have a load media issue with my Epson S60600. I can't find an engineer in the UK other than the main Epson dealer (too expensive for a contract) and other than this issue, it's been fine. I'm assuming it's a dodgy sensor and easy enough to replace if I knew how. Does anyone have a...

Did you fix this? I have the same issue

Could you reshare the file please. I'm having issues with my 60600. Thanks

Hi all My Epson S60600 keeps coming up with a Load Media issue. I think I've narrowed it down to the sensor on the head. When I turn off the Media Skew, Media Width and the Media End sensor it loads fine. So one by one I turned them back on and it was the Media Width sensor that threw up the...

So I created my own profile in Flexi and it looks so washed out compared to my Onyx profile (custom profile created in Onyx 21). I could see the dots on the flexi profile where as the Onyx version seemed pretty hard to see, a very good print in my eyes on a sold colour. I've been fighting this...

Thanks Pauly I tried printing a few of the ink limit charts using various Dithers but Enhanced Stochastic seemed to work the best. I think I've nailed my process but I am going to repeat it using the Contone method and see how they compare. I know Flexi has a icc profile compare feature but is...

Thanks everyone. Now onto Dither. I’ll be honest I never really understood this but from I understand it’s the pattern on how the droplets are laid on the media. I’ve always thought my onyx prints were better than my Flexi Prints. I always put this down to the print resolution but now I’m...

Thank everyone. I'll check if I can separate the resolution and passes. I thought High quality were finer drops (I'm sure I read that somewhere but I could be wrong)

Apologies, I forgot when I change the pass rate, my resolution changes. This could be because I am using Flexi and the Epson S60600. On my system, my 8 Pass BIDi is 720x1440, I tend to use HQ because why not, it's high quality. If I was to do 720x720 my pass rate is 4 passes and my 12 pass is...

Hi everyone Just curious as to what resolution everyone tends to print at? I know it's preference but I'm looking to tweak some settings. Here's my list: Workwear Vinyl: 16 Pass Uni Directional I do this because the detail is small on chest logos and I want to get the best possible quality as...

So after playing about at the weekend, I have come up with the following: Print out a Ink Limit chart in Flexi Leave the print to dry for a day Scan the Cyan row using i1Profiler (Advanced options) / Measure Chart Select 1 row and 1 column Change selection to Spot Scan 100% patch...

Thanks, I'll read my watches with the Color Muse and take it from there and let you know how I get on. Once you've created your profile, how do you compare it to another? I used to do this some time ago but I can't remember the software. Onyx had a pretty good compare feature which should be...

As per the title, does flexi do hot folders for cad cut vinyl? I'm finding it difficult to just cut some standard text without having to load it into a design program like flexi, Illustrator or Graphtec studio just to cut it. Running a Graphtec FC9000 Thanks

So I bought a color muse, it's quite a small funky design compared to the i1Pro2. So I am going to attempt to create a new profile in Flexi 22. I'll write a list of what I'll do and please correct me if I am wrong. Since writing that, I've now printed the initial ink limits chart (not using...