Search results

its strange cause it doesnt happen on any other media. So i would think if it was glue, it would affect them all. and yes, we use constant tension

What could be causing static cling to not feed out or roll up correctly on our HP800W. Sometimes it stops advancing while printing cause it gets stuck, and other times it will print, but after it advances it out to cure, it can't roll it back in cause it gets stuck. We have been printing on...

Any recommendations for pricing a print I am doing for another local shop on my HP 800W. They are supplying the material, but it is a material that i have not used before, so i will need to set up the print mode, temp, saturation, etc. The machine will need to do a color calibration. Then they...

Any recommendations for media/pass mode to use for poster prints on HP800W? I have a Lexjet Satin Photo paper that works ok, but i have to print at the lowest temp and it still deforms a little. Printing on SAV is a much clearer print. Both are printing at 6 pass mode. What do some of you...

I have both a UV printer with a Roll to Roll unit and a few HP Latex roll to roll printers. Which is recommended for outdoor perforated window vinyl? I assume UV inks would last better as they are made to cure with UV light. What about laminating needs? Unlaminated vs laminated would one...

Wil the canon imageprograf 6600 give me photo quality for smaller sizes as well. I know the larger sizes it is really good. But the smaller the print the closer the customer will look at it. 4x6" will probably be the smallest.

We currently sell other framed designs to customers and want to be able to start offering a photo printing service to our online customers, any sizes from like 2x3" photos up to about 32x46". I am thinking about either the Canon Imageprograf 4600 or maybe getting an Epson Ecosolvent printer...

which laminator do you have?

And any recommendations for a good laminator? And which are the main items you sell that get laminated? with my stuff being UV printed and latex, does it need the lamination?

Any recommendations for getting into event centers or schools to offer printing services to them?

Appreciate the advice, I see what you are saying, I definitely dont want any small jobs coming in. Our average order online is like $150, so i want to keep the jobs in that range. I will check out the B2B and local chamber of commerce! thank you!

good thoughts. We sell on amazon and etsy right now

I currently make custom products that i sell online, but i am looking to get into providing printing services locally since i have downtime on my machines. Any advice as far as the best way to get into this field? I have the equipment listed below , so i want to offer banners, yard signs...

Thanks for your reply. We tried the general formulations RV8 material. The material was deformed at 178F and ink was not cured. I want a material that is semi rigid so when we are handling the prints it is harder to crease or damage them. Do you have an experience with any polypropylene or...

Any recommendations for a good media for framed prints? We frame 18x24 and 24x36 prints in wood frames with acrylic fronts. We currently use a Lexjet Sunet Satin Photo paper printed on a HP 800W. We run into issues where the prints will sometime ripple in the frame (sometime between shipping...

Hi All! I am printing on a clear static cling material with my HP 800W, using a 32 pass mode with white on the bottom and color on top. We started to notice on longer jobs that go over an hour, that just the yellow drops out. I assume it is some sort of in restriction or air in the line cause...

Thanks so much! I will give this a try tomorrow.

Can anyone explain to me how to take apart the curing unit (heaters and fans) on the HP Latex 365? I need to clean out the little holes as I think they are clogged from dust causing uncured vertical bands. Do I just remove the screws on top of the curing unit? Thanks for you help! Thanks, Steven

Thanks guys, I will check that out

I am trying to print on a polypropylene paper on my HP latex 360. I have tried it on both matte and gloss polypropylene but both print out super matte and just brushing my fingernail over the print makes a scuff mark. I would like it to print out gloss so it can’t scuff. Any suggestions? I...