Search results

Oh okay, I have to look for another machine, thanks for your help :)

Hi guys, I don't want to open a new thread because I see that a few people here have a Vevor laminator 51inch (1300mm). My question is, can I fit a 54inch (1370mm) medium? My prints are never more than 51inches (1300mm) due to crop marks so it would be fine for me if the maximum working area...

Okay, so I replaced the cut protection strip, blade holder and blade itself. It didn't help. As the next step would you recommend replacing the main board? I am considering a new plotter in this case. I have seen some reviews of the Summa S2 T160 and also have some good references from people I...

I use FineCut9

Thank you for your ideas, personally I am more inclined to the fact that there will be a problem in the knife holder and that the knife probably cannot turn completely sometimes. I'll try both ideas, give it some time because like I said it doesn't happen regularly and see if the problem...

Hi, thank you for the reply. I forgot to mention that I changed the cut protection strip a few days ago, but nothing changed. I use Mimaki Cutting Blade 45° - SPB-0030 and the offset is set to 0.25 I also have to say that it doesn't always happen. It's more of a random error, but I'd like to...

Hi guys, I noticed that my Mimaki CG-130 SRIII plotter sometimes cuts something like an ellipse instead of a circle (just not an exact circle but there is a bounce), I am attaching a picture. Has anyone encountered this problem and what could be causing it? I thought about replacing the main...

Hello guys, I have a problem with the Mimaki CG 130-SRIII cutting plotter. I cut approximately 1 meter long sheet of vinyl foil. At the beginning, the cuts are accurate, but the further the foil moves forward, the cut seems to deviate downwards (I attach a photo). Has anyone had a similar...

Hi Netsol, I create the files, I always use the same color profile. I save the file as PDF / X-3. Can there be an error somewhere in the process?

Hi Stephen, thank you for your response. I'm not sure if I understand how to flatten a PDF file, would you be able to explain it to me or send me instructions on how to do it? well thank you

I also thought it might be graphics but when I put the same image printed rotated 180 degrees, the image was without lines. However, the lines appeared again in another image that was printed in place of the previous image. lines will appear on the graphics in the second half of the media (I...

Hi, sometimes black lines (photo) appear when printing various graphics. It's not regular but it's getting more frequent. The line is not across the entire width of the foil, only in some pictures. Can anyone help me with this? the nozzles are fine. Print test is 100%. Thank you for your...