• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

streaking

  1.

    HP Latex 365... Anyone know what causes this?

    We've been coming up with this streaking when we do long runs, and it particularly seems to affect the black. It's happening when we print perf, regardless of the manufacturer. This is the Briteline 60/40, run at "Max Black" CMYK (all four at 100%). Profile is a custom one I created from the...
  2.

    Streaks Around Design

    I have a Mimaki CJV30-130. I am getting vertical stripes on the top, bottom & in front of my design. Stripes are in all 4 colors. I just replaced 4 expired ink cartridges (factory SS21 which I always use) after running expired cartridges for a couple weeks. My test print is good. My print...

  3. Latex 360 Curing Issues

    I have three Latex 360 printers. One of them is having issues drying the ink on heavy coverage prints. All settings and parameters are the same across all three devices - profiling, heat, optimizer. I cleaned the machine with the issue as the inside can build up with oily moisture. The...

  4. OCE Arizona 250 printing onto MDO / wood

    Hello All, We're having intermittent trouble with streaking and handprints on our OCE board prints. The sheets must be cleaned before printing, and we most often have great results. Sometimes, we get a big streak through a print, or some other mark which comes from the cleaning. We've...

  5. Outdoor Jr. won't come back to full print PLEASE HELP !

    My outdoor Jr. dried out a few weeks ago. A friend came by slapped in a new head, pulled pressure and it printed for a day before it started drying up again. Now I have everything apart, I've been pulling pressure from the ink lines going into the dampers, then from the dampers to where they...
Top