Concrete Post Material????

[bsbp1230]

We were asked to wrap 10 concrete posts, about 20' tall and about 15' around. These are all indoors at a mall, but right there is the question what material to use, one for it to stick to the post and the other to keep the "hands" from picking it off. I see that 3m has some tools to install their product but I was looking to see if there was a different product out that does not need special tools. Thanks!!

 

[signmeup]

By "wrap" do you mean like vehicle wrap? If so you might want to paint the concrete first to seal it. That way you're wrapping paint, not concrete.

 

[cgsigns_jamie]

The 3M stuff is amazing material. If you use that you won't need to paint the columns.

 

[bsbp1230]

signmeup, the post are painted already. Thanks for your post!!

 

[bsbp1230]

Should i post this in a different forum, i just did not know where to post for more replies.

 

[signmeup]

I suspect that it's not considered much of an issue. Take a piece of the wrap material and stick it to the painted column. If that works you should be good to go. I think if you overlap the seam by 2 or 3 inches it should stay fine.

 

[Steve C.]

You might consider using floor graphics material. I used it on some table
tops and it is really tuff stuff.