• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help Cutting on Stahl's SuperTEK Printable Clear Matte

PrinterPower

Unoffical Printer IT
Good afternoon,

I have a few questions regarding the cut lines when cutting on the material in the title.

I use a Versacamm SP300i with a 60 degree cutting blade. On SuperTEK clear, I get cut lines that are perforated and although it's not impossible to weed, it's a little aggravating when before, I could get smooth cut lines but I don't know what I'm doing wrong.


To make it weedable, I cut with 110 gf of pressure (at 30 speed) but I do remember doing it at about 90 gf with nice cut lines. I'll attached pictures to show what I mean.

It's worth noting that it's only this material that does it, everything else is fine.
 

Attachments

  • IMG_2785.JPG
    IMG_2785.JPG
    1.5 MB · Views: 263
Top