BVG
New Member
Absolutely stumped on this!
When we poll the media width within the Cutting Master 4 Plugin it's showing the width at 1/10th of what it actually is (ie. 136.550mm instead of 1365.50mm).
If I poll the media width directly within Cutting Master 4 it gives the correct width, so feels like there's some conversion going on between cm and mm that I can't find.
Anyone else been able to fix this? Weird as our FC-8600 works just fine with all the same settings.
**EDIT - Found the issue. GP-PL step size on the FC-8600 is 0.01mm/step but on the FC-9000 only goes down to 0.1mm/step.
When we poll the media width within the Cutting Master 4 Plugin it's showing the width at 1/10th of what it actually is (ie. 136.550mm instead of 1365.50mm).
If I poll the media width directly within Cutting Master 4 it gives the correct width, so feels like there's some conversion going on between cm and mm that I can't find.
Anyone else been able to fix this? Weird as our FC-8600 works just fine with all the same settings.
**EDIT - Found the issue. GP-PL step size on the FC-8600 is 0.01mm/step but on the FC-9000 only goes down to 0.1mm/step.
Last edited: