• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

FC8000 Not Cutting Top Inch - Contour Cutting

RoyalCask

New Member
FC8000 Not Cutting Top Inch - Contour Cutting

Is there a margin setting or something that restricts cutting within an inch or so of the organ point? If so, can I turn it off?

Thanks all!
 

WYLDGFI

Merchant Member
Maybe your pinch rollers are restricting your width?

1. Scan the media with the pinch rollers WIDER than the media.
2. Open the pinch and bring the pinch rollers in closer or onto the edges of the media.
3. Hit CONTINUE or #4 on your control panel. You now have max width available to cut...but you need to be careful!!

If you're talking about the length...say 1 inch from the lead edge of the media, thats the media eye/ scanner at the front.
 
Last edited:
Top