• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help Gerber Omega 6.5 Win 10x USB to Graphtec FC4100-75

Joe House

New Member
You need to install the drivers before you plug in the USB to Serial adapter. If not, remove it in the device manager, making sure that you remove the associated drivers and install the drivers before plugging in the adapter. Then it should show up under the "Ports - Com and LPT" section in device manager. Find it there and see what com port it's assigned to. In your Gerber add plotter window, use the com port that is assigned to your adapter - do not select USB as your port. It's worked every time for me.

Good Luck
 
Top