• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Graphtec / Vinyl Express Q75 problem cut

A

acmeoner

New Member
i bought a q75 , ran a few things on it no problem. updated the firmware what was requested..
was running a project that was (text) 15"x15' and only cut about half of it and stopped as if it were
finished cutting no error just the beep when done.. ran a singular box the same size see if maybe it was the dxf file
imported.,., same thing ...help...:confused:
 
C

citysignshop

New Member
Not specific you your cutter...but.....Default 'page size' in the new setup might be 99", or 99 feet! or 99 metres!
Check what might have changed...always an issue with updates!
 
A

acmeoner

New Member
citysignshop said:
Not specific you your cutter...but.....Default 'page size' in the new setup might be 99", or 99 feet! or 99 metres!
Check what might have changed...always an issue with updates!
Click to expand...
thank you so much that was the problem.. didnt even think of looking there..
 
You must log in or register to reply here.
Top