Grommets are always a challenge. I have a few different grommet machines, one is a number one and another one is a number two. I have some grommets that have a 3/16 inch flute and other grommets that have a 3/8 inch flute. Problem is, is that I need some type of Grommet that has a quarter inch flute or roughly around 6 mm. I cannot find a thing. There is a Grommet available for the number one Grommet machine however, the inner diameter of the hole is only 6 mm. That's almost more of an eyelet than a Grommet. What does everyone else do? I have been using the 3/16 inch flute Grommet which, does squish the coroplast a bit. Hoping someone can help me out? I have a sample sign from a supplier and these ones are nice but I have no idea where or who did these.
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Grommets for 4mm coroplast
- Thread starter donkur
- Start date
-
- Tags
- #coroplast grommets
FireSprint.com
Trade Only Screen & Digital Sign Printing
We grommet 10mm Coro at FireSprint.com using hiker grommets. You might check with hiker.
tulsagraphics
New Member
Yep, same. And for thick substrates, I just use the manual press instead of the hydraulic. Just need the grommets to grab -- not crush.