• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Help... Print Quality Issue...

M

mjohnsonsa

New Member
In the middle of a print job my quality has started degrading substantially... Can anyone give recommendations based on the attached photos what the issue can be?

The printer is an HP Latex 315 (Out of Service Contract)
 

Attachments

  • 20231031_100911.jpg
    20231031_100911.jpg
    1.5 MB · Views: 199
  • 20231031_100935.jpg
    20231031_100935.jpg
    1.2 MB · Views: 91
  • 20231031_100842.jpg
    20231031_100842.jpg
    1.1 MB · Views: 104
  • 20231031_100919.jpg
    20231031_100919.jpg
    1.6 MB · Views: 93
Last edited:
M

mjohnsonsa

New Member
White Haus said:
Looks like media contamination or something printed without heat.
Click to expand...

Thanks for the quick reply. So I tried changing the media and it was the same problem. As for the heat you can see the quality problem as it is printing (before it gets to the heater)...
 
M

mjohnsonsa

New Member
dypinc said:
Looks like might be an optimizer problem. How much usage is on the optimizer printhead?
Click to expand...
Thanks for the direction! I manually took out the Optimizer printhead and cleaned it with distilled water and its printing great again :)

I think it needed more thorough cleaning than what you get with the "Clean Printheads" operation.
 
You must log in or register to reply here.
Top