Hi all, we have purchased a new 630 about 4 weeks ago. Straight from the get go it prints blurry edges vertically. The installer recommended several manual head alignments will eventually fine tune it to be perfect.
I have done endless head alignments, upped the optimiser, tried all types of profiles and pass settings & cleaned the encoder strip but the prints are still constantly blurry vertically. It's causing our plotter to cut off as the ink isn't laying accurately as well.
The tech has escalated the issue to HP, however any advice or similar experiences would be great.
Photos attached.
Cheers.
I have done endless head alignments, upped the optimiser, tried all types of profiles and pass settings & cleaned the encoder strip but the prints are still constantly blurry vertically. It's causing our plotter to cut off as the ink isn't laying accurately as well.
The tech has escalated the issue to HP, however any advice or similar experiences would be great.
Photos attached.
Cheers.
