Issue with Roland SP540v

[printpal998]

So this is the situation: I have ran out of ink and did not know that I shouldn t let that happen. The printer probably pulled some air in; as a result the printer on the print test printed only the blue and black color (I ran out of yellow and magenta) when put new ink.

I selected a head wash in the menu and new when i turn on the printer it does "filling ink" and it does it for a long period only wasting ink (3 bottles). I checked if the pipes are clogged and they are not.

What could be the issue? Is there a way to do a hard reset so when i turn on the printer it works without starting the "filling ink" automatically.

Note: All dampers and cap tops have ink in them.

Appreciate any help.

 

[Zoogee World]

Is there ink in the lines? If there is ink in the cap tops, then it means it's going through the head, might be that you blew a fuse. Check the fuses on the main board.

 

[damonCA21]

Unplug the printer from the wall and leave 15 minutes. Start it up again and select the ink configuration in the menu. This should cancel the headwash

 

[cornholio]

Just unplug the pump and let the filling finish.