Laminator parts needed

[styckers]

need some parts for 55 inch cold laminator need take up bar and rubber band to connect the two bars from diage laminator any help is greatly appeciated

 

[styckers]

need shaft with large pully on it and the band that attaches both shafts please need help

 

[White Haus]

It would be helpful if you included the actual model that you're referring to.

 

[styckers]

diage 55 inch cold laminator

 

[styckers]

or if someone wants to purchase it for 400 ill sell it

 

[creativedezign]

does anyone knows how to get a plastic/rubber pully for the daige laminators
mine is model 3 (38") the belt is .25" thick round rubber or plastic clear x 22" total length
help please
other modes are daige solo 38in also daige quickmount 3 and 4

 

[creativedezign]

the part is apparently silicone clear or yellow trans.
anyone with the Diage Solo 38" can you tell me how long it is. my guess here is 22" x 1/4" - so far nothing and laminator.com don't reply to their emails and only offer fax, email
tried calling the company sales help - no one answers and no voicemail. Also trying madison art store in NJ with same results. i would try grainger and mcmaster but apparently this is not a off the shelf product.

 

[creativedezign]

need some parts for 55 inch cold laminator need take up bar and rubber band to connect the two bars from diage laminator any help is greatly appeciated

did you ever locate a source for the diage cold laminator. i have reached out to a few laminator businesses and its crickets.

 

[creativedezign]

mcmaster had it in two types both under $10 each and fyi that incident was just so the pully will engage to start to unroll film. i had originally ordered from Grainger but they just forgot about me... still waiting for a cancelation message. I was shooting in the dark on that as it was not clear if it would work.
i did not open the cover but another cable exists. not having that problem so i moved on to get rid of the boat anchor. Even uscutter has no clue how i can get it fixed and they at one time was a product available from them.

 

[onlygraphics101]

there is a seal company where i live that will custom make the part you need if interested let me know ill get their info i am in no way affilliated with them just trying to help used them a few times usually takes 24 hrs to make and ship .

 

[Mike Paul]

does anyone knows how to get a plastic/rubber pully for the daige laminators
mine is model 3 (38") the belt is .25" thick round rubber or plastic clear x 22" total length
help please
other modes are daige solo 38in also daige quickmount 3 and 4

Try a zip tie