Latex R2000 white issue

[01bej313]

Hi guys,

My r2000 will print say 2 metres of window film absolutely fine then start banding on the white, with say 5mm banding throughout. Both printheads are fine. Everything checks out in regards to substrate being flat. Wiper blades and spitting changed. Just wondering if anyone has any settings to use maybe to see where we are going wrong here.

Cheers James

 

[balstestrat]

Unless you have air in the ink system... most likely it is related to printheads. I would measure the weight of each printhead and ask your support if that's fine.