Mimaki jv3 250sp new problems

[Pagan]

NEW PROBLEM ARRIVE . AFTER I INSTALLED CSV FILE. I TRY TO GET TO #ADJUST OR TRY TO INSTALLED NEW FIRMWARE
PRESSING FUNCION+ REMOTE OR < >, NOTHING COMES UP , NO BEEPS .I CHANGE KEY BOARD, NOTHING HAPPEN. HELP

 

[Pagan]

Problem solve

NEW PROBLEM ARRIVE . AFTER I INSTALLED CSV FILE. I TRY TO GET TO #ADJUST OR TRY TO INSTALLED NEW FIRMWARE
PRESSING FUNCION+ REMOTE OR < >, NOTHING COMES UP , NO BEEPS .I CHANGE KEY BOARD, NOTHING HAPPEN. HELP

problem solve , Bought a new main board $1800.00 later ,bingo printing again

 

[brightbanner]

problem solve , Bought a new main board $1800.00 later ,bingo printing again

So expensive main board.
You can find main board with better price.

Brent

 

[Pagan]

New for me

ACTUALLY,I BOUGHT A USED MIMAKI JV3 SP FOR 1800.00 , WITH 3 NEW PRINT HEAD ONE OLD HEAD BUT IN GREAT PRINTING CONDITION
PLUS I GET THE SLIDE BOARD,IO BOARD, IO2 BOARD, POWER SUPPLY ,IF BOARD , MAIN BOARD AND ALOT OTHER PARTS.
CHANGE PARAMETER FROM 160SP TO 250SP AND PRINTING AGAIN. I THINK I MAKE A GREAT BUY.

 

[jaki514]

How did you change the parameter? i need help please... thanks

 

[Pagan]

Changing parameter

How did you change the parameter? i need help please... thanks

Do this: when the printer boot and show the firmware version press REMOTE + FUNCION at the same time, you going to hear a beep , after that go to FUNCION
And go down pressing the v key into you find parameter, some parameter you can't change they are secret
number mimaki never release . Here is the list

5-5. #PARAMATER items
5-5-1. SYSTEM PARAMETER[Function]
System parameter values are changed.
[System parameters list]

No.	Indication	Set value	Description	Remarks
0	COMP.X	0	Mechanical correction X (in increments of 0.1 mm 500 mm – actual measured value)	Adjustment of rangeaccuracy If the system parametervalue is incrased: Length of a patternplotted will be increased.
1	COMP.Y	44	Mechanical correction Y (in increments of 0.1 mm 500 mm – actual measured value)
2	R GRIP	0	Adjustment of dead space on the right-hand side of the paper(in increments of 0.1 mm 25 mm - actual measured value)	Adjustment value foredge adjustment If the system parametervalue is increasedead space will bereduced.
3	L GRIP	0	Adjustment of dead space on the left-hand side of the paper(in increments of 0.1 mm 5 mm - actual measured value)
4	CAPpodY	20	Adjustment of capping Y position (in increments of 0.1 mm)
5	PULLpos	25	Idle suction position (in increments of 0.1 mm)
6	FLSposY	0	Adjustment of flashing Y position (in increments of 0.1 mm)
7	WIPposY	35	Adjustment of wiping Y position (in increments of 0.1 mm)
8	RESERVE	0	RESERVE
9	CUTposi	0	Adjustment X of the medium cutting position(in increments of 0.1 mm)	Adjustment value in theX-direction when cuttingIf the system parametervalue is increased:Remaining portion of thepaper after cutting willbecome larger.
10	EDGE LV	50	Medium edge detection level (Unit: %)	Edge detection levelwhen the medium widthis detected
11	H12dist	252	Distance between head 1/nozzle row A and head 2/nozzle row A
12	H13dist	640	Distance between head 1/nozzle row A and head 2/nozzle row A
13	H14dist	792	Distance between head 1/nozzle row A and head 4/nozzle row A
14	RESERVE	0	RESERVE
	•••
19	RESERVE	0	RESERVE
20	FEEDadj	25	X feed pulse correction (in increments of 1 dot)
21	V1BiADJ	0	Correction base value for V1 waveform Y direction shuttle movement(in increments of 1 dot)
22	V2BiADJ	0	Correction base value for V2 waveform Y direction shuttle movement(in increments of 1 dot)

No.	Indication	Set value	Description	Remarks
23	N1BiADJ	0	Correction base value for N1 waveform Y direction shuttle movement(in increments of 1 dot)
24	N2BiADJ	0	Correction base value for N2 waveform Y direction shuttle movement(in increments of 1 dot)
25	V1HBiAJ	6	Correction value for V1 waveform doubled shuttle movement(in increments of 1 dot)
26	V2HBiAJ	4	Correction base value for V2 waveform doubled shuttle movement(in increments of 1 dot)
27	RESERVE	0	RESERVE
28	RESERVE	0	RESERVE
29	RESERVE	0	RESERVE
30	WormORG	0	Worm origin	0: normal (cm/s)
31	RESERVE	0	RESERVE
	•••
41	RESERVE	0	RESERVE
42	CUT.OVL	0	Medium cut over run (Left)
43	CUT.OVR	0	Medium cut over run (Right)
44	CUT.spd	0	Cutting speed
45	RESERVE	0	RESERVE
46	QC3636	41	Print Quality 360 x 360
47	QC3654	41	Print Quality 360 x 540
48	QC3672	41	Print Quality 360 x 720
49	QC7272	41	Print Quality 720 x 720
50	QC1472	41	Print Quality 720 x 1440
51	QC1414	298	Print Quality 14400 x 1440
52	FlashSW	1	Periodical Flashing Switch	0: Disabled / 1: Enabled
53	PMPsign	0
54	RESERVE	0	RESERVE
55	Ext.CND	0	Command extension	0: Disabled / 1: Enabled
56	FEEDlow	30	Long direction feed rate (1mm/s)	Medium feed speed whentotal feed is 9mm or more
57	PAGE	0	Page length clip 0: The page length command is activated,and clipping is done on the page. n: The page length command is inactivated, the plot is plotted and a margin is added at the rear end.	Indicates the action whenthe plot length exceedsthe page length.
58	OEM		For OEM	0: JV3 / 1 : SPZ
59	USE INK	0	INK type
60	MECAsiz	0	Mechanical size	0: 54 inch1: 63 inch2: 100 inch
61	HASH	0	Hash check pass	0: check pass(forced startup) 1: check pass & survomotor OFF
62	SUPPORT	0	Adjusting function extension	2: Released 3: Released + English
63	INITIAL	0	Initialization	1: All parameters areinitialized. 2: Only system parameter 3: All parameters are secret.