No ink coming through after replacing dampers roland printer

[jasmine05]

Hello,

Hope I can find some help, tried it all ..
Changed the dampers on my VS-420 since when I launch print test no ink is coming through.

Tried:

- chasing air with sirynge
- ink is coming through and I can get ink in the sirynge while I chase air but from the head nothing comes out on paper
- added product on captop/head let it sit for a while
- all cables are well connected
- several cleaning
-swich on and off the machine , ...

Many thanks in advance (I am in a middle of a big big stress as I have work to provide to customers tomorrow and haven’t
found yet any solution) checked the whole internet, youtube etc.etc.

You are my last chance



ps: english isn’t my main language hope you can still help

 

[cornholio]

When you can suck ink from the captop with a syringe and there is no printing at all, your fuse is probably blown.
Get a service engineer with all the parts, if you need the printer soon.

 

[jasmine05]

Thanks.
I’ll check it out.

 

[adamfromayr]

Also for the cause You changed the dampers did you check all your cables? no ink on them? and are seated in properly also