• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Question Problem transfering Adhesive from Forever B Paper to A Foil!

BigPrintPro

New Member
Hello there,

I'm new to this field of printing, so plz hear me to the end.

I've recently purchased the FOREVER Laser-Dark (No-Cut) 100 A-Foil Finishing w/ 100 B-Paper Low Temp - Laser-Dark 11x17 from USCutter.

I'm using the following laser printer and heat press:

iColor 600
Secabo Heat Plate and Base Plate, 40cm x 50cm, use with Frame to make Secabo Heat Press TC7 110v

The problem is:
The B paper doesn't fully transfer the adhesive to the A foil after heating at 300 F for 90 sec (as recommended by the manufacturer). Plz see attached pics.

Questions:
Is the heat press compatible with the Forever Laser Paper and the iColor Laser printer?
In your experience, what are the best settings for the paper/heat press combo?

I inquired with USCutter, Secabo, Uninet (printer's manufacturer), and Forever. They were not helpful!

Plz advice.

Thanks
 

Attachments

  • IMG_3134.JPG
    IMG_3134.JPG
    1.5 MB · Views: 209
  • IMG_3135.JPG
    IMG_3135.JPG
    1.7 MB · Views: 159
  • IMG_3136.JPG
    IMG_3136.JPG
    1.5 MB · Views: 158
  • IMG_3137.JPG
    IMG_3137.JPG
    1.4 MB · Views: 162
Top