• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Problem with fuji acuity select 26

Yd.dml

New Member
Hi all,

My Fujifilm Acuity Select 26 won’t print. It keeps showing “Waiting for ink reservoir to fill”, and the reservoir never fills. I can hear the pump starting, but the message doesn’t change.

Is this air trapped in the system, or could it be something else, like a filter or the pump? Any advice is appreciated.


Kind regards,
Youssef
 

CMYKENGINEERING

Ink runs in our blood (call a doctor)
It could be the subtank sensor. If it has gone bad, then it will never send the signal to the printer that the subtank is full.
 

dtfonestop

New Member
hi, is there a way i can check this for certain?
A couple of ways to narrow it down without buying parts first.

Check whether it's every channel or just one. If only one color (often a white, since white settles) never reports full, that points to that channel's sensor or a blocked feed to that reservoir. If all of them hang, look at something shared, like the pump or the main filter.

Watch the reservoir itself while it's "filling." If you can see the ink level actually rising and it gets near the top while the message still won't clear, the sensor isn't reporting it, and that's your sensor or its connector. Reseat the connector before blaming the sensor. If the level isn't moving even though the pump runs, it's a supply problem: an empty or unseated bottle, a clogged inline filter, a kinked line, or a pump that spins without moving ink.

On a machine that sat before you bought it, dried ink in the filters is pretty common. Does it happen on every color or just one?
 

ToTo

Professional Support
A defective level sensor would lead to overfill the reservoir, a clogged meniscus filter and to dripping print heads.
If it is in the color, I would go for the main ink filter or the pump. If it is white, I would go for the recirculation valve., because if the valve is hanging system will just recircle ink and not fill up.
 
Top