• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

REMOVAL??? - OLD Trailer Wrap cracked vinyl

signworksenc

New Member
Is there any remover solution that will help break down the adhesive on an old vehicle wrap that really works?? Or am I stuck with running the electric Vinyl Zapper on a 16' trailer?:oops:
Brothers Chemical Vinyl Off?
Rapid Tac Remover?
Fusion Tools Epic Orange Adhesive Remover?
 

unclebun

Active Member
Adhesive remover won't work to take the vinyl off. There are a couple of products intended to be brushed onto the top of the old vinyl, allowed to soften it, then you can peel the vinyl off. We've tried a couple and were totally unimpressed.

This is why you make sure the customer knows that you are charging your full hourly rate for the vinyl removal before you take the job.
 
  • Agree
Reactions: 3 users

pro-UP

New Member
If you use any chemical adhesive removals be sure to do a spot test so you don't encounter issues like a prior poster has experienced recently.
 
  • Agree
Reactions: 1 users

ProSignTN

New Member
Vinyl and glue removal is the only process I will not bid on or even estimate. time & Materials only. I have seen videos of semi trailers being cleaned with a steam genie (hot water pressure washer). They do them one right after another and it looks efficient. I have had some success with just a small steamer. Harbor Freight has one for $129.99. Best of luck to you.
 
  • Agree
Reactions: 1 user

signworksenc

New Member
Thanks everyone for the comments! We definitely let the customers know there is an hourly rate for as long as it may take. We learned several years ago not to put a total price on a removal job after using up the funds halfway through the job. It always takes 1 to learn from! I'll do some more research on this before taking the job. Thanks again for the advice everyone!!
 

dannyd1962

Remote Freelancer
For removals we always charge the customer a time & materials charge. This way you are covering your ass and the customer knows this upfront.
 

Stacey K

I like making signs
Can we see a picture of the trailer, just for fun! Like Pro-Up said, another poster had a silver metallic trailer and the paint was coming off. Hopefully your trailer is white or black, and not silver metallic, I've always had issues with silver.
 
  • Agree
Reactions: 1 user

RabidOne

New Member
We did a 5 ton a few years back, everyone in the shop spent a few hours on it. It ended up being over 40 hours, but we told the customer we were charging hourly and they were fine with that.
Nothing more than heat guns, scrapers and remover.
 
  • Agree
Reactions: 1 user

Norman Clifton

New Member
Is there any remover solution that will help break down the adhesive on an old vehicle wrap that really works?? Or am I stuck with running the electric Vinyl Zapper on a 16' trailer?:oops:
Brothers Chemical Vinyl Off?
Rapid Tac Remover?
Fusion Tools Epic Orange Adhesive Remover?
we had older diamond reflective vinyl - it was very painfull and slow to remove - had luck with oust degreaser - tried lots of adhesive removers and zapper - we billed per hour - clenaed all the vinuyl offg and some of teh adhesicve (that was the worse) and ended up sending to a detailing shop to finish the last half of adhesive removal - then we got vehicle back top do the fun stuff - new lettering
 
  • Agree
Reactions: 1 user

rydods

Member for quite some time.
Yikes! I can't zoom in for a close up, clear image but hopefully it's just cracked through the laminate only. It's probably just that one side mostly, right? How much do aluminum panels for trailers cost?
 

unclebun

Active Member
I just priced panels to reskin a 16 foot v-nose trailer and the panels were $880 direct from the manufacturer, with prebent pieces and everything cut to size.
 
  • Agree
Reactions: 1 user

Mike Paul

Super Active Member
Personally I would turn down that removal job... Tell them to get new panels and bring it back for lettering.
 
Top